1997

Hello, I bought bike in a box, would anyone have pictures how wiring harness is routed and what kind of mounts it has? Any pictures would be helpful! Thank you!!

1997 fe400 part out, I have everything it looks like it needs new crankshaft bearings and maybe a few other things. I just bought i new gasket set and air filter, oil filter and spark plug. Let me know what you are looking for, my email is [email protected]

Hello everybody! Owner of Hsb Fe400 1997. I'm looking for a couple of forks guards guide (see picture attached: n° 12 ), in coulor yellow fluoroscent. Many thanks in advance Andrea

Looking for exhaust silencer Fe400/501 model year 1997. European market only. Thanks :) Andrea Italy

Ciao from Italy! Happy owner of a Fe 400, model year 1997, I'm looking for the sidepanels in fluorescent yellow. Better the couple. At least the left one. (no fiberglass replicas) It will be a tough search ....!! Many thanks in advance. Greetings.

Dear community :) I finished the assembly of the engine. I replaced every parts of the carb. Identical to origin except main jet which was not available at 185 but 190. I have check the clearance of the valve to 1/6 turn méthods. The ignition plate set up is controlled as described in the...

Hello dear community. My name is Julien, I’m from France and I’m 34 year old. I lately bought a Husaberg 400FE from 1997 and I’m trying to fix it. I came here in order to find some advise or information regarding my new sexy bike ;) The engine been rebuilt in 2012 (nickasil), new piston in...

1997 FC501 very good condition, and runs excellent. Many extra parts and pieces included $2500.00 CAD.

I bought a 1997 Fe 501 e Husaberg that has brown oil indicating a head gasket leak so I replaced it with a new one and after I got it tightened down and put back together I noticed it was leaking to the outside again. ahh annoying! What should I do? buy a new gasket and try again? The only thing...

https://sandiego.craigslist.org/nsd/mcy/6129358421.html

I read that the valve clearance is supposed to be 0,10mm. I'm not exactly sure what that means? Am I supposed to use the 10mm for the intake and exhaust? Is there a tolerance or is it only 10mm? Thanks for your help.

I just bought a 1997 Fe 501 and need to change the head gasket. My two questions as of right now are: 1: How do you find dead up right center for the timing chain? 2: How do you take off the timing chain? Thank you for your response and helping a new owner out.

New to the forum and new to Husaberg. Took it out for the first time last weekend, was a blast. This is my first 4 cycle off road bike. Wow, what fun!

Just got a Husa 501FE 1997 who don´t want to start.:furious: Tips are welcome.

Hello, im new to the page, and i am the new owner of a 1997 husaberg fe600e supermoto built on supermotojunkies.com. i bought the bike barley running, backfiring and loss of power before half throttle, basically to make a long story short i figured out my flywheel and stator are bad, the...

Hello Need some advice here So I got a 1997 FE 400 E with the stock VHSB Flatside Carb It starts OK runs Good in upper throlttle pull hard , but with small throttle opening , like just above idle it's rough , hesitades and stumbles , once past this it' rev hard and fast I've cleaned...

I have a 1997 FC501 that I am restoring. I was just able to get it CA street legal(don't ask). But that lit a fire and I need some parts. Curious what the compatability is between other years and models. Found a 1991 FE501 on craigslist that looks the same but I just don't know enough about...

http://husaberg.org/service-manuals/21138-1997-sales-brochure.html#post1664921997 Sales Brochure added to Service Manuals.

1997 Sales Brochure

hello all, I just bought a 1997 Husaberg fe400 and its a blast to ride. the bottom end has a ton but once I get half way through the RMPs it starts to bogged down really bad.... I am new to Husaberg so I don't know much about them mechanically. my guess would be these bikes are geared low for...