1995

Hey guys: Just bought my first 'Berg' and I LOVE it!!! What a great engine. :bounce3: I ran a dual sport event last week and it is an awesome machine for that purpose. It was a little tiring to start though. Is it possible to make this bike into an electric start? I know the 1997 was an e...

Hi guys, i'm nacho from Andorra, i'm really not an owner of a husaberg, but i'm building a rallye bike and recently i bought a Rear shock (Öhlins) from a husaberg fe 501 (1995) i need to re valve and change spring , the original have this written on it 60-280 i know 280 is the...

Hi guys ive recently bought a 1995 fc499 husabeg for greenlaning, i no nothing about the engine, wondered if anyone could give me some info on it, and places to get parts from, im from birmingham uk, She aint that pretty im sad to say but dont really matter to me as its just for having a...

This may be a dumb question, but is it possible that WP forks were built (mine are 1995 WP 4057 model) with Rebound or Commpression shims in one leg but not replicated in the other? The reason why I ask is, I have pulled my forks down to clean, inspect, replace seals and oil etc. and depite...

Hello every one, Are these bikes good? Theres one in the paper for $1200. It runs, but idles like ****, hard to start, but mostly good shape.

Well thought that maybe some one out there might be interested in this i recently found this locked away collecting dust it has only 32 miles on it thought this was pretty sweet just thought i might throw this out there see what the burg fans thought about it thanks everyone !!

Hi Just to let everyone out there know that I successfully fitted a front end from a 2006 kTM Lc4 660 without any need for modification. The Bearings fitted perfectly and the stem is about 2mm longer than the old bergs so I fitted a shim to take up the slack. All seems to working so far with...

I am fighting with hard starting problems on my 1995 FC 501. I now have an ignition that will throw big lightening bolts (ie 0.37 inches reliably) so my problem must reside in the fuel / air system. I have a Dellorto VHSB 38MM carb. I have read that small bits of crud can cause my...

Need some advise ... 1995 FC 501 I am replacing the Stator, I have removed the left handed nut in the center of the fly wheel. There is a little rust on the inner part of the fly wheel. How do I get the flywheel off so I can get at the stator. The flywheel itself is cast aluminum...

Starting problems 1995 FC 501, Street Legal, SEM ingnition, Dellorto VHSB 38, WAberg Seattle WA USA I am new to Husaberg and the group so I need a little help analyzing my problem and deciding on the best solution. My current state of affairs…the bike is hard to start, but runs...

I just purchased my first Husaburg, and now my leg needs medical attention. A prior owner removed all of the electric start components and lost some of the internal parts. I need a Workshop manual for a 1995 600 enduro to identify the missing parts and reinstall the starter. Where can I find...

Hey there for a project I am finishing, I'd like to get the list of all the Husaberg models since about 1995. FE, FC, FS, FX, what have you :) Also looking for suspensions-related data, like fork and shock sizes and manufacturers. Thanks for your help!

Hello everyone, I am new to the group, but I have visited often lately. This an an excellent web site. I have several problems. I purchased a basket case FE 501 from a local shop. I cannot get this thing started. I believe I have followed everything correctly. I have replaced rings. I have...

Does ANYONE know if I can use any later model years plastic on this bike. It doesn't have to be total bolt on, I can modify, if you know it's been done before. There's also some reference that an e-Start, was available for this year, does any know for sure. I realize that the left engine...