Valve circlip, groove dimension

Dr_C · Apr 27, 2008

Anybody by chance having the dimensions for the groove in the valve? I have ground cutters for making my own valves out of blanks, but now I need a titanium valve manufacturer to do it for me. OR, if anybode knows which valve manufacturer (Kibblewhite, Xceldyne, Ferrea, DelWest, Manley) that has been producing valves for Husaberg, I can contact them?

Taffy · Apr 28, 2008

why would it be any different to your steel valves? same dimensions surely?

regards

Taffy

Dr_C · Apr 28, 2008

Yes, for sure. But I ground the cutters to fit the groove. Now I need the actual dimensions to tell the valve manufacturer. I could measure the groove and the cutter, but I would prefer the design dimensions from the drawing. Jens is a busy man...

Taffy · Apr 28, 2008

i used a stone and not a cutter for mine.

there are dimensions for the valve somewhere, i've seen them.

regards

Taffy

Taffy · Apr 28, 2008

i have a diagram from a company in germany here (hardcopy) it's from a company called grosswochter. says the single groove should be 2mm wide and 4.8mm diameter compared to the valve which is 6mm.

to get the correct groove height you should-as a racer-stick the valve in the head and then measure first.

regards

Taffy

Dr_C · Apr 28, 2008

Re: RE: Valve circlip, groove dimension

Taffy said:
1. the single groove should be 2mm wide and 4.8mm diameter
2. to get the correct groove height you should-as a racer-stick the valve in the head and then measure first.

1. Thanks Taffy :thumbup: , that is sufficient to calculate the radius of the groove (R1,13)
2. Thanks for the tip! :wink:

Taffy · Apr 28, 2008

RE: Re: RE: Valve circlip, groove dimension

you know that i've done it all (badly!) LOL!!!!!

my mech skills and your money - we could have gone so far.......!

regards

Taffy

Valve circlip, groove dimension

Help Support Husaberg:

Dr_C

Taffy

Dr_C

Taffy

Taffy

Dr_C

Taffy

Similar threads

Register CTA

Recent Discussions

Recent Discussions