All these parts are off a low mile 2006 FE 650 bike that had drop valve engine failure.
Heres what I have:
WP rear shock assembly complete w/hardware. Does NOT need servicing.
WP complete fork legs with Beringer caliper mount. Absolutely no pitting on chrome tubes & seals are in great shape. lower tube guards of for pics. Caliper says 54mm tube diameter at top best I could tell w/my caliper.
Rear shock eye to eye is 15.5
Front forks are 36" from top of tube to center of wheel axle bolt.
Beringer 4 pot front caliper w/hardware. Also have the FTE master complete w/braided line and lever etc...
Breaking 310mm floating radial wave rotor w/hardware including speed sensor magnet. Part # 58609060000
I have the front and rear wheel axle , nut and rear adjusters as well.
Id be willing to seperate the rear shock, otherwise Id prefere the front goes all together.
I have had a chance to look up the value on most these parts, and am listening
to reasonable offers plus shipping. Paypal is best for me.
Im also interested in a 04'-08' 650 piston, liner, rod, & possibly head without cams.
Thanks in advance----Proflow
Heres what I have:
WP rear shock assembly complete w/hardware. Does NOT need servicing.
WP complete fork legs with Beringer caliper mount. Absolutely no pitting on chrome tubes & seals are in great shape. lower tube guards of for pics. Caliper says 54mm tube diameter at top best I could tell w/my caliper.
Rear shock eye to eye is 15.5
Front forks are 36" from top of tube to center of wheel axle bolt.
Beringer 4 pot front caliper w/hardware. Also have the FTE master complete w/braided line and lever etc...
Breaking 310mm floating radial wave rotor w/hardware including speed sensor magnet. Part # 58609060000
I have the front and rear wheel axle , nut and rear adjusters as well.
Id be willing to seperate the rear shock, otherwise Id prefere the front goes all together.
I have had a chance to look up the value on most these parts, and am listening
to reasonable offers plus shipping. Paypal is best for me.
Im also interested in a 04'-08' 650 piston, liner, rod, & possibly head without cams.
Thanks in advance----Proflow
Last edited:
