I'm in the midst of servicing the heim bearings. I've yet to remove either the upper or lower bearing but... The upper collars cam out with a few taps. The upper bearing is clean and moves freely by hand. I had to kidnap a rabid gorilla and give him a sledge hammer in order to get the lower collars off. The lower bearing does not move so freely. Sooo, the problem is I don't know if the one that move easy if ok / or bad and likewise for the lower. I need new collars for the lower 'cause they got phucked up when they were removed. I figure I'll at least replace the lower and depending on advice given replace 'em both.
Thanks in advance. :?
Thanks in advance. :?
