Hey man,OK so Husaberg never used the suffix "TE" until the two strokes of 2011 (TE250 and 300)Husaberg never made a 570 until 2012 which is a worry for you since you're making your bike sound like a Husqvarna!
You are on the right web site aren't you?
Front rim from a 2002 HUSABERG won't fit a TE300 2011. But a rear one will.
Cheers
Taffy
Okay dude thanks. Btw they are sm rims so 17”. I know about I might need to buy a bigger brake adapter for the front since it’s a 320mm.they'll fit.
Taffy
And last think, will I just use my spacers?they'll fit.
Taffy
yes.
you'll have to change the offset of your clamps though. with a two stroke I'd have thought 14-16mm.
Taffy
Hey, one more thing.yes.
you'll have to change the offset of your clamps though. with a two stroke I'd have thought 14-16mm.
Taffy
Think I can just use my stock spacers On my husa? And if not where would I buy spacers?Have to be careful of 2016 KTM group bike axle fitment. Some that had the 4CS forks had smaller axles. Not a show stopper however, as the bigger wheel spacers can be easily be swapped out. Hubs are the same.
Hey man, what about rims from a 2004 husa on the 2011? And do you think the original spacers will work?OK so Husaberg never used the suffix "TE" until the two strokes of 2011 (TE250 and 300)Husaberg never made a 570 until 2012 which is a worry for you since you're making your bike sound like a Husqvarna!
You are on the right web site aren't you?
Front rim from a 2002 HUSABERG won't fit a TE300 2011. But a rear one will.
Cheers
Taffy
Yes, you can use the original spacers, but generally they get dinged up removing them. They are reasonably inexpensive though, so treat yourself and buy new if going that routeThink I can just use my stock spacers On my husa? And if not where would I buy spacers?