Power Problems after New Coil, Plug, CDI, Stator - 2012 TE300

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
M

Mitch300

Joined
Mar 15, 2024
Messages
2
Location
Nz
Gday I’ve got a 2012 te 300 used to run great until it it cut out it’s had new coil new plug new cdi new stator and still won’t go even after having had several mechanics look at it any ideas?
 
Off the top of my head without knowing anymore info, has it been verified to not have spark? If no spark, have you eliminated the kill switch as a possibility? Also, what is the condition of the piston and rings? Have you done a compression test?
 
eeazye said:
Off the top of my head without knowing anymore info, has it been verified to not have spark? If no spark, have you eliminated the kill switch as a possibility? Also, what is the condition of the piston and rings? Have you done a compression test?
Click to expand...
Yes I have verified kill switch and checked piston it has no spark at all
 
Can the CDI handle the new stator? What are the readings when u measure the stator?
 

Similar threads

B
Spark for 2-3 seconds then nothing.
Replies
10
Views
1K
mosierz48
M
A
TE300 won’t fire
Replies
6
Views
607
Ace74
A
F
FE570 low idle issue, outside of the usual suspects! (I think)
Replies
3
Views
1K
emanujo
E
S
Steve's 1998 FE501 Husaberg
Replies
2
Views
512
FE350CS
FE350CS
S
Steve's 2007 Husaberg FE650E aka Big Berg
Replies
3
Views
741
anthonys4691
A

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top