Help Support Husaberg:
- Joined
- Feb 19, 2003
- Messages
- 3,227
- Location
- Escondido, Ca. USA
I would clean out your carb jets, check the float level and check that the fuel tank breather is not clogged. More than likely its just the jets. You probably should do a complete carb rebuild because when you take the float bowl off the gasket will be a shriveled up piece of its former self. In fact all of the gaskets and O-rings will be in poor shape if the carb has never been rebuilt. I would buy the gasket kit and the needle and seat kit from Husaberg / KTM as it will be more complete than say a Moose aftermarket carb rebuild kit and you will know that it will have the correct seat size.
I don't think Taffmeisters has FCR rebuild kits but he does have some individual parts.
If the valves are out of adjustment (too tight) it could also create the inability to idle but it will / can also cause very hard starting or even no starting.
I don't think Taffmeisters has FCR rebuild kits but he does have some individual parts.
If the valves are out of adjustment (too tight) it could also create the inability to idle but it will / can also cause very hard starting or even no starting.
Last edited:
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
