This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FE650 sounds supercharged

I'm with Berger, not a normal sound to my ears. Seems like a whiney bearing sound to me, maybe from an idler bearing under the L/H case.
 
you're all wrong....

it's from the starter sprague assembly. remove that lot, start the bike, noise gone.

regards

Taffy
 
Im with Taffy on this one, I just went to the shed an started my 04 and my 08 450's, and yes the noise is there in both. The 30hr freshly built 08 is noisier than the 200hr 04, but the 04 sprague is worn and slipping and needs replacing.

Let the noise be, ride and enjoy and have faith the Sweeds have built a quality and fun product for you to ride.
 
berger said:
My 2 cents.
Starter sprag/ torque limiter issue. Take it out, run it and see if the noise is gone.( the only time I have heard this concern personally, this was the issue... on 2001-2002 bikes)
Possibly a ccounterbalancer bearing issue.

The noise sounds like a roots type blower sitting on top of a big block chevy. Loud as hell, but the bike will run just fine. One bike I know of ran for a couple of years that way.
you're all wrong....

it's from the starter sprague assembly. remove that lot, start the bike, noise gone.

regards

Taffy

Please God , tell me Taffy didn't agree with me.......once :D
 
berger said:
Please God , tell me Taffy didn't agree with me.......once :D

Well done Berger.
I think Taffy might have mellowed a little since picking up his LDC :silly:

Supercharged Husaberg does sound good by the way
 
you guys must be hearing something i am not through my headphones. All i hear is the chirping.
 
Bofwool said:
you guys must be hearing something i am not through my headphones. All i hear is the chirping.

ah! you have another problem...

"i talk to the trees they try to take me away......"!!!! :twisted: :twisted:

Berger was right! I have a funny way of agreeing with him that's all!

regards

Taffy
 
So that noise (air siren, whistle) is normal ?
After installing new sprague bearing and gears it started to whine that way ,but when i mix outer and inner older gears with new sprague bearing it is not whining just rattles.

So what is normal or better? :roll:
 
PolandHusa said:
So that noise (air siren, whistle) is normal ?
After installing new sprague bearing and gears it started to whine that way ,but when i mix outer and inner older gears with new sprague bearing it is not whining just rattles.

So what is normal or better? :roll:

I believe there was a production change in 02. The parts look basically the same but are not interchangable without having a noise issue. So you need all new style parts or all old style parts.
 
I know of the change in parts but.
Old <02 sprague bearing,and gears rattles the same as pre <02 outer and inner gears with after 02> sprague bearing.
And after 02> full setup (gears and bearing) does not rattle just whines,whistle i do not know how to name it.

So my question - what is normal (safer) that it rattles or whines like the 02> setup?

Bike souns like that one: http://www.youtube.com/watch?v=K9_OEsE5IWU



Simple bike but so complicated :?
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions