Fe 390 - starting problems

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 8, 2011
Messages
15
Hy Folks...really need some help here

I own a Fe 390 (2011), with +-1200km.

2 last times i went for a ride it happened the same issue: after ridiing for 20/25 minutes, i stopped (engine off) for a little chat about the trail with the other riders (no more than 30/45 seconds), and when i hit e-start again...the engine turn, but no start!

Tried again in intervals of 5 minutes...nothing!

After 25/30 minutes, she starts again, and after...no more problems!

Do you guys have any thoughts on this?
Thanks
 
It is most likely your fuel pump. Search the forum and you will see that alot of us have had problems similar to yours and replacing the pump worked for me, some others have had luck with fuel additives. Good luck
 
the reason no one is answering you is because this is a widely discussed topic and a little work by you, you could find the answer to your own questions. Good luck!
 
didn´t find anything in the forum, that match my exact problem
remenber: there´s no connection between engine temperature and start/no start

anyway, bike is now on the dealer, and no luck with fuel pump.
next step - FI
 
Ditto--almost certainly the fuel pump. This is exactly what mine did before switching to CA Cycleworks pump. At least 30 trouble-free hours since.
 
If the new fuel pump doesn't solve your problem, do a search on torque converters. They can create warm start issues.
 
so far...so good!

motosnet2809.jpg


major test this weekend with a 450km ride
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top