Billet cylinder head

Dr_C · Oct 6, 2014

I think we mean the same thing. But what if the cage had 0,1mm play against the pin, and let's say 0,5mm play against the rod. Then maybe the cage would not touch the id of the rod, but only the od of the pin? Getting my point? Or do you think the cage will deform (oval shape) and still touch both pin and rod?

spanner · Oct 6, 2014

Maybe DrC, only going on my observations.

Dr_C · Oct 12, 2014

The stock crank will have to do until an new one has been produced. This time trying to weld it with 0,05 mm throw (cheeks together).

Taffy · Oct 13, 2014

I wouldn't have welded the pin quite like that Mats. I'd have welded across the top and across the bottom = two welds. anyway, good luck.

Taffy

Dr_C · Oct 14, 2014

Taffy said:
I wouldn't have welded the pin quite like that Mats. I'd have welded across the top and across the bottom = two welds. anyway, good luck.

Taffy

Thanks for charing that info, Taffy!

Today I bent some alu-tubing for my new coolers. Made a couple of random bends to choose from. Sand, heat and a decent bending machine does the trick!

spanner · Oct 15, 2014

Nice plumbing!

I like John Britten`s idea of having the radiator under the seat

Dr_C · Oct 17, 2014

spanner said:
Nice plumbing!

I like John Britten`s idea of having the radiator under the seat

Ok. That might seem like a harmless comment...

spanner · Oct 18, 2014

.... just with a bit of plumbing like that, I thought
maybe that could be what you have in mind

jgratton · Dec 14, 2014

Any updates?

Dr_C · Dec 15, 2014

Hi guys!
As this thread turned out to be impossible to get moved to the Mechanical section, and it is getting quite large, I decided to start a new thread:

http://husaberg.org/mechanical/18816-technical-adventures-dr_c.html

Check it out!

Billet cylinder head

Help Support Husaberg:

Dr_C

spanner

Dr_C

Taffy

Dr_C

spanner

Dr_C

spanner

jgratton

Dr_C

Similar threads

Register CTA

Recent Discussions

Recent Discussions