- Joined
- May 27, 2016
- Messages
- 138
- Location
- Portugal
Great job on the plastics. Have you checked the needle jet. Mine was oval
Help Support Husaberg:
I could not detect any wear on the needle or atomizer by eye, but I will likely replace them just to make sure. If I remember correctly, it has a K23 needle and 260FN atomizer.
I have a couple of the original magazine tests for the 94 501's, and both tests rave about there being no bog on these bikes. However, researching this site, it seems to be rather common.
I have a couple of the original magazine tests for the 94 501's, and both tests rave about there being no bog on these bikes. However, researching this site, it seems to be rather common.
- Joined
- May 27, 2016
- Messages
- 138
- Location
- Portugal
Mine has That carb too . The flatside and o have no bog . It's a 400
After replacing everything inside the carb, and trying well over 100 different jetting combinations over the past 6 months, new fuel pump and petcock.... it ended up being a clogged vent hose on the gas cap.
New $1 vent hose and its running flawless, no bogging.
Easy to overlook the smallest thing.
Sent from my iPhone using Tapatalk
New $1 vent hose and its running flawless, no bogging.
Easy to overlook the smallest thing.
Sent from my iPhone using Tapatalk
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
