08 FE450 Clutch question

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have a 08 450 and the same problem finding
neutral after stopping. I found if I rev the motor a little just to stop it from stalling, begin to release the clutch while applying pressure to the gear lever it pops into neutral easy.
 
I never worry about finding neutral. If I cant get it first go, I leave it in first and hit the kill switch. If I really need neutral I will then select it with the engine off. Most times I leave it in 1st, pull the clutch, hit the starter and take off, roosting the people still trying to start thier bikes and find the gears.

This is what I have done on the 04 since new and now the 08 450 Berg. Yes the clutch will drag when it is cold, they do that when the engine and the oil is cold. As the engine oil heats up things become better. If the clutch will not release when it is hot, then you have problem with the clutch needing bleeding.
 

Similar threads

1
70degree engine and clutch slave bleeding...
Replies
4
Views
1K
tpayne
T
S
Steve's 2007 Husaberg FE650E aka Big Berg
Replies
3
Views
298
anthonys4691
A
E
Hello from New Zealand
Replies
7
Views
2K
bushmechanic
bushmechanic
2ndGen
New FE570 owner...
Replies
0
Views
78
2ndGen
2ndGen
F
For Sale 2010 FE450 dirt and SUPERMOTO SETUP
Replies
6
Views
2K
jsmith807
J

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top