This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Husaberg Rare Spares - Taffmeisters

Acerbis daren't upset KTM by doing any repeat but private business. they claim all the moulds were lost in Italy so the Acerbis guy hads got Husaberg and the red Husqvarna muddled up.

I have written to Racetech and will try them again. If nothing else they could perhaps do the open backed fork gaurds they presently do in black for me in yellow and in blue.

I can dream!

Taffy
 
Thanks for your efforts. Let's not be to pessimistic.
That been said a buddy of mine bought a 2008 Husqvarna510 smr and everything plastic related is available from two or three after market companies + oem support from Italy. 90-125euro for the hole plastic kit. Wich makes me a bit envious.
 
I can only guess how many Husabergs were sold compared to Huskies. 25% in the 90s? None in the 80s.

difficult.

Taffy
 
Had a load of KTM big end pins shortened together. The big group are 32mm for the 400/470./501/550/644.
there are two 35mm pins for the 628s

2 x 450 pins for the 2004 450s. These have to have a trenched pin most often. Looh closely and you can see a groove.

On the meantime I am getting 1999 decals re-manufactured. Attached is the first draught. I have OEM left but not right for some and other times both or none.

regards

Taffy
 

Attachments

  • big end pins done..jpg
    big end pins done..jpg
    78.4 KB
  • first draught 1999.jpg
    first draught 1999.jpg
    59.6 KB
  • DECAL 4.jpg
    DECAL 4.jpg
    55.4 KB
  • FR rallye decals 1999 (4).jpg
    FR rallye decals 1999 (4).jpg
    95.6 KB
  • husaberg 90's fork leg decal.jpg
    husaberg 90's fork leg decal.jpg
    94.5 KB
Last edited:
  • Like
Reactions: 1 person
Rocker Bushes
I don't want to go Chinese, these rocker bushes and my Con Rods are from there but the quality is brilliant! these dotted pads hold oil, the fit against the rocker shafts is bang-on. respect!

BTW, my rods come from Taiwan. If you tell the Taiwanese they come from China its a bit like saying a Canuck is a Yank or a Scot is an Englishman. :D

CFBs (cam follower bearings)
The CFBs for the 1989-2002s are back in stock. WE have had a batch made in co-operation with a large Husky dealer.

regards

Taffy
 

Attachments

  • dotted rocker bush close.jpg
    dotted rocker bush close.jpg
    79 KB
  • CFB bearing 1989-2002 (3).jpg
    CFB bearing 1989-2002 (3).jpg
    75.6 KB
Last edited:
  • Like
Reactions: 1 person
I found one 1993-1994 seat yesterday under a pile of stuff. be quick!

we are now out of 1994-1996 tailpieces (as of yesterday)
we are out of 1997-1998 front MX boards.
we are out of 1999 old gold front MX boards.

we have 3 front MX boards left (1989-1996)

we're now out of 1989-1996 FE Enduro Tailpipes but still have several shorter FC tailpipes.

WE don't have any 1999 silencers left but we have loads of the tubes. in 1999 it was the same length for both FC or FE (that means 'long' and to the back of the bike). I think 40gbp for these ($50) will be about right.

regards

Taffy
 

Attachments

  • seat cpl 93 94.JPG
    seat cpl 93 94.JPG
    14.3 KB
  • exhaust silencer tube 1999.JPG
    exhaust silencer tube 1999.JPG
    19.3 KB

Similar threads

Taffy
Taffmeisters - for sale
Replies
8
Views
2K
Spuddy18
S
C
For Sale 2008 FE 550 - Restored & Adventure-ready
Replies
0
Views
505
canadius
C
C
For Sale: 2008 FE 550 - Restored and Adventure-ready
Replies
0
Views
2K
canadius
C
C
For Sale For Sale: 2008 FE 550 - Restored and Adventure-ready
Replies
1
Views
675
canadius
C
L
2003 fe 400 questions
Replies
18
Views
5K
Lee h 03
L

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions