Alien electronic appliance on FE650...

Springarn · Dec 3, 2020

Hi all!
Got a Husaberg Fe650 that I purchased 2nd hand. It's got a home made electrical component, no idea what it is! I've attached a couple of pictures of it (hopefully they're showing up?).
Got three cables coming from it, one of them is connected to power from the stator. I unplugged the other two cables a while ago and can't remember what they were connected to. Oops.
Any good theories?

steve · Dec 3, 2020

Flux capacitor?

gamer3210 · Dec 4, 2020

from what I can see You have a husaberg with sem amal 99-2003 ignition, the wires from the stator should be connected to the coil of your coil, the module is icu 10. is that the stator and cable began to fall, the capacitor increases the electric discharge, because the capacitor stores electricity, which to some extent improve the spark in the falling stator

gamer3210 · Dec 4, 2020

the red sealant under the valve cover does not reflect the previous owner well
I can not see the cbcomodul at cb ???

Springarn · Dec 5, 2020

Hi gamer 3210
Thanks for replying. In regards to the the alien technology, you reckon it’s there because the stator is starting to fail and not producing enough of a spark? So the alien should be wired in sort of between the stator and ignition coil?

What’s a cbcomodul? Is there something missing on my bike?

Cheers

gamer3210 · Dec 6, 2020

this is just my theory. I do not see the Cb of the coil (ignition controller) in your motorcycle it has the ICU-10 mark, google it you will see.

Search

Search

Alien electronic appliance on FE650...

Springarn

Attachments

steve

gamer3210

gamer3210

Springarn

gamer3210

Similar threads

Register CTA

Recent Discussions

Recent Discussions