2002 650 electrical issue.(stator)

gregfreefaller · Apr 22, 2017

Do you use any wd40 or other stuff prior?

You then just leave it or remove and dry periodically

Sent from my iPhone using Tapatalk

zaga · Apr 24, 2017

Hi

Your best solution, besides the gasket, is to spray some insulator on the stator, so it's rust free.

This will stop all your troubles and wd40 and stuff.

I used to open and clean the stator after each ride, etc ... and after this just forgot about the stator

Here are some pict

ZAGA

gregfreefaller · Apr 27, 2017

That looks ideal. I take it there are no issues preventing the stator doing its job? It will still generate as it should

Sent from my iPhone using Tapatalk

zaga · Apr 28, 2017

Hi

No problems, the things between stator and flywheel are magnetic

This the best way to prevent rust, I've done a lot of things and this is the solution.
Also don't advise the wd40 and similar products, specially with the stators that have been rewind.
I used to put this every time I rode the bike, but this will infiltrate the stator and will make the new coating crack.

That's my experience

ZAGA

gregfreefaller · Apr 28, 2017

I've ordered some 3m 1601 insulating spray. Should work nicely.

Sent from my iPhone using Tapatalk

zaga · Apr 28, 2017

Hi

I've done a quick search and it's not quite that

You need a coil enamel spray (sorry about my English)

Something like this

gregfreefaller · Apr 28, 2017

Ah right, don't think it's the same product but I thought it would do the job pretty well.

Sent from my iPhone using Tapatalk

2002 650 electrical issue.(stator)

Help Support Husaberg:

gregfreefaller

zaga

Attachments

gregfreefaller

zaga

gregfreefaller

zaga

Attachments

gregfreefaller

Similar threads

Register CTA

Recent Discussions

Recent Discussions