Help Support Husaberg:
- Joined
- Dec 19, 2007
- Messages
- 26
- Location
- A dark dark place
I fitted a set of ktm factory sms clamps to mine, original offset was 22mm and the sms clamps offer either 12.5mm or 7.5mm offsets. Took a little bit of work to fit but the advantage will be massive over the oem clamps.
- Joined
- Jun 6, 2008
- Messages
- 1,092
- Location
- Simi Valley Ca.
I kept checking e-bay and they popped up last week.
I don't need them for a while but they are nice to have.
I ended buying a new set of clamps for my 650 a few years ago with the same part #.
I was sent the 16/18s which is fine. I have them set at 16.
But these are the 17s for sure. And was happy to get them for $150 which is 1/3 of the new ones.
80001031117 and 80001034117
pollo
I don't need them for a while but they are nice to have.
I ended buying a new set of clamps for my 650 a few years ago with the same part #.
I was sent the 16/18s which is fine. I have them set at 16.
But these are the 17s for sure. And was happy to get them for $150 which is 1/3 of the new ones.
80001031117 and 80001034117
pollo
Have you replace the bearings in them? I am not sure I have received correct ones.
Attachments
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
