2011 FE390: Backlight Speedometer?

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 21, 2014
Messages
7
Location
Sweden
Hi

I have no backlight for speedo, speedo also has 3 connectors underneath, only 1 of them connected, dont know where the other goes.. Is there wiring schematics for this bike somewhere? or a place to buy a brand new electrical wiring net?

Much appreciated :cool:
 
Wish i had complete answers to the actual questions youre asking, sorry, but want to mention this: are all fuses whole? one fuse operates the speedo / blinkers / rear brale. the speedo has a battery so it works without power, except there is no light then
 
My 2010 FE570 doesn't have a backlight either. I queried the dealer about it when i first noticed and he told me they are all like that! I found it hard to believe that they can sell a road registered vehicle without a visible speedo at night. I believe he just didn't want to deal with it, as i found out later on he is a lazy prick! I have never bothered looking further into it as i don't ride at night ( unless i spend a little too long at the pub, ha ha!). If you find it to be an easy fix then please let us know!

P.S. All my other "older" bergs all had/have working backlights!
 
So I asked the google about this problem. Seems the M.A.E. Elettronica unit is quite unreliable, apparently a lucky dip according to a few other boards. Mine works ok but if it fails I'll go for a vapor or similar unit.

Doesnt help the current problem though.
 
if i some day sooner or later get more into what aftermarket units are any good and have the money, maybe i do that, i will then take the speedo in and investigate deep and analyze exactly the fault, not bad connector behind screen, battery is for saving etc, the supply comes elsewhere, maybe we can locate the manufacturer and ask for a schematics


BR
JIHAD
 
Here are a couple of pictures from behind the mask on my bike. 2010 FE 570. Street legal Euro type. Look anything similar to yours?

There are quite a few wires coming down from the instrument cluster, first wrapped in grey tubing and then splitting off to different connectors.

I can dig a bit deeper if it would be of benefit to anyone. Let me know what you'd like to see or know.

edit - damn it, the pictures are rotated ... sorry about that.
 

Attachments

  • IMG_2946.jpg
    IMG_2946.jpg
    86.5 KB
  • IMG_2948.jpg
    IMG_2948.jpg
    82.3 KB
So I asked the google about this problem. Seems the M.A.E. Elettronica unit is quite unreliable, apparently a lucky dip according to a few other boards. Mine works ok but if it fails I'll go for a vapor or similar unit.

Doesnt help the current problem though.

if i some day sooner or later get more into what aftermarket units are any good and have the money, maybe i do that, i will then take the speedo in and investigate deep and analyze exactly the fault, not bad connector behind screen, battery is for saving etc, the supply comes elsewhere, maybe we can locate the manufacturer and ask for a schematics

BR
JIHAD



Use the information from the label for the model/part number, good luck !

Used you pic KD please dont sue me for copyright !
 
Last edited:
its a good thing my picture was on its side since you had a rocket pointing the right way to add in!
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top