works

Hi! Bike is FE450 -06 with 550 -03 engine and swapped electrics between them after this guide: http://husaberg.org/mechanical/24974-engine-change-650-a.html SEM stator values checked out last time I measured them. When I have my battery connected my headlight and taillight barely works...

My works bike is for sale no reasonable offer refused. Ti exhaust, Aluminum Tank, 41mm Flat side. 4 sets of plastic with graphic and the set it came with. 126 hours 4200 km complete rebuild @ 85 hrs. Rekluse Pro Starter Z. I Have a in the box 380 kit will throw in for the right money. fedge

I have a 1995 FE501. When I purchased it, there was an annoying off idle richness, so I took the carb apart and found the needle was very pitted. I then purchased a 37mm Keihn FCR off a 2002 YZ250F. Jetting specs are here http://www.thumperfaq.com/wrf_vs_yzf.htm The carb works great, the bike...

good day to all 2004 fe 450 , 4000 k's and trouble free so far . delo 400 changed every 100 k's . excellent oil and cheap . oil screen cleaned every 100 k"s .. oil filter replaced every 300 k"s .. air filter changed every ride ( depending on conditions ) .. silkolene for...

Ladies and Gentlemen, I am happy to announce that some partners and I are currently in the process of pre production testing of a complete subframe fuel tank that will hold apporximately 1 gallon of fuel. This tank will be a complete unit, that is made to be a gas tank and will be a...

I have installed the radiator fan, but how do I know it works. I was thinking of letting the bike idle for a while and seeing if it came on, but chickened out after a while. If it does not work the bike may just get too hot and blow the radiator cap. Has any one put one on and noticed when it...

hi, i got a frame today of DCR and with it came a "works tank", its not in the best shape but i just wondered if anybody knows anything about these and can i get plastics to fit it?

yay for me. i haven't touched my fe550 for 10 weeks or so, since before i broke the living crap outta my leg. i rode the 250 the last couple weeks (i'm not allowed to fall off, or really even put a foot down yet), but i figured i'd take the mighty berg out saturday. the big question is whether i...

I have read the entire owner's manual twice and the repair manual and nowhere did I find a description of the AP adjustment. I have read Taffy's stuff in the Doc about bringing the gap down to 0.028". My question is does a zero gap = zero squirt time? The reason I ask is because I have...

I happened on this website: http://www.mxworksbike.com Some of you may have already passed by it. It was started by the fellow that imported ( or still does?) Technosel seat covers.... Anyway, I thought it was a bunch of neat information and pictures too... Take a look..

Dale thanks for the kit, the engine runs great on idle now, no more popping on deceleration, and no hesitation while on the gas.This is the way the bike should have been from the factory. I did not have any issues while installing the kit, just followed instructions. Andre

Just want to pique a little interest, new project under wraps, details to come, all we can say is......Pikes Peak......(stay tuned!) 8O -Rocky- (Searching for creative ways to spend our kids inheritance!)

I have noticed that the seat screw works it way out (a few turns) after about 20 miles. I have thought about something (velcro/zip tie) that could go thru the loop and attach to the rear fender. I guess I could use locktite or some silicone. Anyone else have this problem and determined a...