woes

I have decided to reinstall my starter on my 01 FC470e. I used all the updated parts that was suggested and I'm still having a little trouble? I purchased a used Yamaha R6 starter mounted everything went together pretty easy but she won't start on the button? To me the R6 starter seems to turn...

I have a 2009 FE570 and I cannot for the life of me figure out how to get a torque wrench or any ratchet for that matter on the drain bolt or filter screen bolt. Any ideas? Is it just me? They must have some low profile wrenches in the EU because that is a tight @ss fit!

So Ive been having some trouble with my bike for a while. I managed to track the problem to the injector because as soon as I took the injector out it ran good for like ten minutes and then back to mrs grumpy, second time it was out I had it professionally cleaned, but same result, ran ok for...

Hi all, The front wheel bearing housings are worn on my recently purchased FE450 the old bearings literally fell out when the wheel was removed ! New bearings have been fitted but there is still excessive play in the hubs... Im considering buying a new excel talon rim and hub or a...

I converted the clutch on my 01 to a left hand rear brake last winter. I used DOT 5 silicone fluid and it has worked great. Of late the brake has been acting up with the lever going from normal to spongy to rock hard. I've spent a couple evenings trying to solve the problem to no avail. Tonight...

I've run into a couple of problems with Wossner - not even recent I have to say but right from the start. One I cleared up today and another that is still on going - it's a nightmare! In the 400, 501, and 470 there are two choices of piston ring. It could be true of the 550 and 650 but I've...

I have had my 2010 FE390 for just a few months. It was a "demonstrator" with about 24hrs on it. I only have about 34 hrs on it now. Won't re-start when hot, no noise from fuel pump, etc., etc. Runs fine as long as I don't stall it or shut it down. The question is: What is the magic formula...

Hi All, New to Bergs, but a long time KTM owner........ I've got a brand new FE390 and have read about a lot of Berg owners fitting the Dirt Tricks timing chain tensioner to their bikes to replace the hydraulic tensioner on their bikes. Is this something that needs doing to a 2011 bike or has...

Hi all Need some advice (new to the forum and the world of husaberg). I seem to be having issues with the battery on my 2006 FS 650e, if I ride the bike daily I have no issues with starting the bike but if I have anymore than 2 days between rides it will not start. I t just clicks until I...

hi, ive got a 20002 FS650 and the bloke who owned the bike before me has cut the sidestand bracket off the frame, as he only ever used it on track. however, im now putting the bike back to road spec, or as near as i can. ive got a sidestand and spring on order from DCR and i was wondering...

Our very first Husaberg was to be delivered and the customer ran it around our parking lot for a while. When he took the choke off the bike would not run. Whoops! When we did the pdi we never had the choke off as we didn't want to run it too long and we wanted to keep the pipes looking new...