wires

Hi everyone, I've recently purchased a 2009 FE450 & have replaced the in-tank fuel pump & filter as part of my preventative schedule. TBH, I was horrified with the complexity of hoses & wires contained (& apparently needed) within the tank ... I'm wondering if anyone has simplified this on...

So i bought my first enduro bike around 2 months ago an fe390 however i have been plagued with injection problems for around 15 of the past 20 hours that I have owned the bike and ive been slowly working out the issues. The injector has been replaced as a precaution(and to give me a spare) and...

Hope somebody can help. I had to solder the 4 red and white wires in the wiring harness under the fuel tank . All went well pump primed everything good ,started up no problem . I thought i would make sure it was a good soldering connection and soldered the wires well.In doing this i did not...

What is the best way (or most feasable) to join two pieces of eletrical wiring together. There is a vast array of different products to use. What is your favorite? With and without quick release connectors.

hi, bike is an 09 FE450. was having real running issues, have just found this little problem- the wires from the 4 pin relay up in the headstock, red/yellow, red/white and black/white are all melted together and are shorting, which then triggers the pump.... this happens when the bike is there...

09 570.3 of the wires on my handlebar hi/lo switch have come loose,which i have no headlight now.They are the white wire,the yellow wire and the yellow with green stripe.where the wires are missing from are numbered 1,3 and 6.Im not sure which wire goes where and cannot find any wiring diagrams...

Greetings All! I noticed that there is very little clearance behind the connector for the lights and engine stop and the bracket for the steering damper. Here is a picture: I removed the connector from the plate holding it, as the plate is made from very soft metal and is bending...

Hi all and thanks the bike now runs, Anyway when i got the bike all the wire to the speedo have been cut off AHH! all they left was the triangle plug with both end that still work, so the four square plug is left on the speedo not on the bike and there are three other wires one white and...

Can anyone tell me the colours of the wires to the backlight on my 650 -03 speedo ?? I've figured out most of the wires but can't get the backlight to light up. Is it the triangular connector with the red-black-brown wires in it ?

I recently purchased a nology wire only to find out that it is teh one used by go karts since go karts run 125 cc engines and my bike is a 2005 fe 650 e, i think i need a bigger wire. I checked on the application chart and found a wire more suitable but no mention of our bikes so I dont know...