wire

Hi guys, I've tried looking for this everywhere but it proves to be hard to find something when you do not know what you are looking for :eek: I've got a 2010 husaberg FE450 and since I bought it I had a broken wire and I can't seem to find what it is for. It's on a steering stalk on the...

Hey just wondering if anyone can tell me best way to wire up a led light bar on my 04 husaberg ? Should I wire it directly to the battery or is there a Easyer better way like could I use the stock head light wires ? My light currentley don't work on my bike because I dont have the hand controls...

First issues: Dead. Reason: a wire to the fuelpump melted on to the exhaust, cut it and put it back with a connector. then: Stalling and dying when i either hit on the side of the tank OR when i went in hoops ( shaking ) made it die and come back for a second. checked wiring and all...

I want to first start by saying, I have 2 bikes. A 2004 FE450 and a 2003 FE650. The 450 starts on the button with great pace. Easily and all the time. The 650 is a dog, it struggles like no tomorrow. It will start on the button but ive always felt the battery is nearing its end. A yuasa...

Good afternoon all, So it turns out that my question pertains to an SEM stator in a '99 VOR 503, which I understand is very similar to, if not the same as a Husaberg unit. Anyways, the stator harness has only 3 wires coming out of it, which all go to the coil. As with other brand stators...

I have been working on my 98 FE 400e and have it almost back together. when it was not working, my brother-in-law needed the battery for some other bike, so he pulled it out. Now I see a Blue wire, not attached on one end (near the battery), but I dont know what it is supposed to be attached...

I have a intermittent bog/missfire on my '09 FE450. I am almost certain it is the plug cap. The brass screw piece that plugs into the spark plug was loose. I unscrewed it, had a look, reinstalled the spring, check it with a meter and no connectivity. I took it apart again, and noticed something...

I am installing head and tail lights on a 09 450 that didn't come with them. Do I drill a hole through the subframe for the wires, and on which side, or do the wires go through that black plug in the center of the subframe. Mine does not have any holes in it but I do see 2 rectangular spots in...

I own a 2011 FE570S. So, I'm looking through the service manual and in the Lighting Systems and Instruments section of the manual, I discover a section addressing clipping the brown wire on the CZ connector, Pin 1 in the wiring harness behind the headlamp mask. Instantly, my curiosity was...

My mate just got an 09 570 and we want to put a low fuel light on it. We have a tank sensor, but cannot find a wire to plug it into. We have an old dash light of mine for the front, but cannot find that wire either. Were the 09's not wired for it? I thought the wires would be there just blocked...

Hi there, I have just got a new SEM Stator via Taffy & Sparks & there is no blue wire, this was originally connected to one of the 3 yellow wires coming from my Reg/Rect. The bike is 2003 FE501 and I have spoken to Taffy earlier today and was advised to just connect the two yellow wires from...

Hi, Is it possible to install complete wire harness with stator, flyweel and starter from Husaberg FE 450 04 to a Husaberg FC 470 02?

Made a mistake before...I meant Ktm gs250 1996, which seem to have a similar wiring with Husaberg from year 1999. The problem is that I would really need a newer wiring than 1997 husaberg wiring, which won't fit with the light switch, which fits to 1999-2008. If anybody knows, does any Ktm LC4...

2010 FE 390 EU version. Help guys! I've just fitted symtec heated grip elements, everything went well until I tried to wire the main power. I found various likely feed wires, which were live only when motor running and all checked by multi-meter. Connected heated grip switch power wire, to these...

Well, I put some 25mm handle bar risers on tonight, I am 6 ft tall, and these seem great. Whilst wresting putting the bars back on the risers, I noticed a 3 pin connector seperated. I took the front headlight asembly off, and saw a 4 pin AND a 3 pin terminator dangling not connected, coming...

Is such a thing available? I am currently rebuilding my street legal 501 FE. It is in great condition except from a somewhat "worn" wire harness. Any input is most apreciated. Thanks. Kurt in Reno

I'm in the process of installing tail and turn signals ,I can see the channels in sub-fender but where do the wires go from there?

Hi, as above really. I think I want a shift light to stop me over revving (used to a 16,500 limiter with a rev counter) for my FS450. How difficult is it to wire this and is it even possible. I think you need to hold the revs at 3,000 for it to figure out what time the lights come on but how...

no matter how much I tried, the lights always get burnt once I open throttle. I assume its bevause the current is not rectified - I just dont know how to do it. this is the coil with red, orange, green and black wires coming out of it in addition, there is a ground plug-like component next...

Anyone out there ever put an oscilloscope on the kill switch signal on the SEM ignition - ie the orange wire out of the CDI? I have a Trailtech computer I am fitting. They normally use a length of wire wrapped around the spark plug lead to capacitively couple a signal to drive the tachometer...