width

Hello, I am going to replace my rear with a new Kenda Trakmaster 2. Problem is that there are two main sizes that I can choose between: K-760 110/100-18 - wide K-760 120/100-18 - wider (and K-760 100/100-18 ) - narrow I see that the rear has already rubbed some on the exhaust... so...

Just found out the hard way that a BT-090 rear in 160 width does not fit the '05 FS model, even with a 5 inch rim. I tried to trim down the edge due to chain rub and swingarm interference, but screwed up the bargain priced tire in the attempt. Has anyone fitted a BT-003 in a 160? I'm thinking...

can someone please tell me how wide the new berg frame is at the point where the top shock mount blends into the perimeter rails ?

has anyone ever seen a wheel rim width for the width of a tyre? seen a chart? talking 140/80 x 18" really (if ya wanna know!) thanks Taffy

this might sound dumb but how wide is a 120/70 tyre? i need to know if it will fit between a pair of wp extreame forks on a 98 bike with a 3.5 rim. any body fancy measuring the width of their wheel for me?

Any thoughts / experience regarding the ideal handlebar width. I am riding predominantly single track woods. The stock bar on my '05 Fe550 measures 32" not including the handguards. I'm toying with the idea of taking an inch off each side, however I do not want to adversely affect the high...

Hi, If one had the option of 5" or 5.5" rim which would be best? The 160 60 Michelin pilot power only just fits, chain rubs on one side and only just clears swingarm on other. Would the wider rim make any difference to this? I would suspect not but would like to hear from someone who has the...

Sticking my SM wheels back on for an MOT on my 2002 501e (replacing bearings all round on the enduro ones and neither tyre is road legal)... Now I'm sure I /did/ have a spacer for it as there's no speedo drive .... and it's probably with the calliper bracket that I also can't find at the...

Hello again, more questions. Another question about specifikations for my Husaberg FE 501 -99. The crankshaft width when disassambled was 65.4 mm and i am not shure if that was ok. Connection rod to crankshaft side clearance is 1.7 mm now and crankshaft width 65.4 mm with new connection rod...

can someone find the width/dimensions of the spacer would be if the counter balancer c/w bearing are removed? had a good look but couldn't find it. it's out there somewhere! regards Taffy

Hi, Next question, what is the width for a new clutch (8+7 discs)? Which clutch is the best buy?