waterpump

Using the video link above, it looks like there is a coolant leak at the water pump. If I am going to attempt this repair, besides part 53 & 54, what other parts should I buy? Additionally, what should I expect? Is there anything worth replacing while I have this piece taken off or something...

After filling the coolant up i realized that there was a small hole in the waterpump area leaking coolant and i don't know why, is there anyone who knows what this hole is then please tell me. It's a Husaberg Fe400 1998

Hi all, I've had a few cooling gremlins recently, and the weep hole started to show a leak. After pulling off the waterpump cover it was really difficult to remove the disc under the impeller. I decided to remove the clutch cover to try and make this a little easier, which it did, but I...

hello! First oil change after rebuild revealed a little grey oil. My guess It's the waterpump seal. Because it deformed a little bit while i installed it. It was a really tight fit and the metal seal was a little bent. I'm wondering if its possible to use ktm water pump seal. Dimension of my...

I like many of you found my water pump seal installed backwards after my hussy started leaking from the weep hole at 100 hours. I ordered the seal listed in the parts manual and I think it is the wrong one. The new seal (p/n 0760102455) appears to be like the oil seal that shares the same bore...

Hi Can somebody tell me what size the waterpump seal is(bigger one)? I'm not able to find it in sparepart list :| Pic: Uploaded with ImageShack.us

will a 10x18x6 (oem 10x18x4) sealing fit in the clutchcover or is it to thick?

was in the middle of changing the waterpump seal on my 02 650 (early 02) and when comparing what the parts book says against what i have i am confused. i have a seal that is the same o.d. as the waterpump bearing and the id of the bearing inner race between the waterpump seal and the bearing...

Hi The bike is 2005 FE650 and i need O-ring for waterpump 10,00x1,30 NBR 70 SH (code 0770 010013) but the problem is - i cant get anywhere this size. Only size i can get is 10,00x1,50 is it ok to use little bit bigger O-ring? The gap is only 0,2mm

Hi, could somebody please confirm waterpump seal size, the book says 10x18x4x4.8 !! for some reason they seem to have an extra dimension, help please.

Hi, I have a small hole (3\4mm diameter) behind the waterpump carter. I discovered this small hole because today i saw the carter near the oil level porthole was dirty and I cleaned it two days ago. So i noticed that some dirty comes out from this hole. So...is that normal? why is it there...

just a request to our regulars to tell us whether this is a retro fit for all the old bikes. photos etc boss? bikebarn, all the dealers we have here? regards Taffy

Anyone who knows if this update is for keeping oil or water in and if it can be used with older models (2004 in my case)? Thanks Marcus

Had a customer purchase this kit for his '06 FE450 and it came with no instructions. To anyone who has installed one....Does the seal go to the crankshaft or to the case? Also...which direction does the aluminum piece with the bearing go in relation to the crankcase and the sidecover? Any...

Weve had some positive response to our water pump oil leak fix kit, our website is under construction so the best we can do is email a picture of a fitted unit so you know its true. email: [email protected] ORANGEBERG------------------ ask about the billet alloy original end cap...

ok so my bike mechanic sets about changing the seals on my waterpump on my 96 fe600 then he calls me to tell me that the camshaft has grooves on it & that is the problem & he couldn't say if it would still leak or not he put it back together cos i needed the bike for an enduro meeting today & it...

There is a small hole right behind the water pump of my FE550e '04. Since 3 rides ago, it started leaking oil out of it. At that time the berg only had 7hrs on. I took it to the dealer and said that he replaced the o-ring on the water pump shaft. I took it for the next ride and still there...