vibration

So after riding my new FE450 for 5 minutes my carpal tunnel kicked in so i need to knock as much vibration out of the bars as possible. Which is the best route? just some rubber mounted bars? new bars? both? the KTM PHDS? all the above?

Is there any noticeable difference in vibration between fs550 vs fs650? i have a 2004 FS650E and it seems to vibrate too much in the seat when you're riding for more than 30 minutes. i don't notice this vibration in my *** on my KTM 450 exc. has anyone riden both bikes and noticed any difference??

I have an '05 FS650c Supermoto converted for the street and like to take it for long rides. The engine vibration is O.K.for short rides, but noticeable after 100 miles or so. I believe a modification could be made to the front two mounting plates where the engine bolts to the frame to rubber...

Hi guys, I'm trying to reduce the strong vibrations coming to the handle bar of my Husa FE 600 (98). I could not find any accessory like clamps with silent blocks, so please , is some one have a good idea it will be very welcome!! Cheers!!

Hi Guys Rebuilt my 2000 fe501e. New main bearings, new cam, new cam bearings, new clutch shaft bearing, valve job, new piston, new cyl plating, new cam chain, rebuilt crank, new '03 rockers. I think that's it. Got her all back together and after about an hour of use a high frequency vibration...

as seen in the doc, i do love my pro grip 719s! but i'm getting a numb hand quite a lot and i want to cure it. firstly, the throttle tube is now the oldest part of the bike, secondly has someone tried the 719s and STILL found they prefer a 'better' grip? i ought to mention that i removed...

Is it possible for the counterbalancer to be installed out of phase, increasing the engines vibration instead of countering? Our FC470 and FE650 have almost no engine vibration, my FC550 shakes substantially. I have checked all engine mounting hardware and have found nothing loose. It has...