vent

Pretty in Stainless innit! I've had a few made; they'll be 15 quid each (plus in the EU). regards Taffy

Did all the fuel pump mods on my 2010FE 570 and went out on my first ride this past weekend. Worked Great. Stopped to take a rest in the middle of a long ride and decided to check my fuel. Opened the cap and fuel game gushing/FLYING out like a geyser. Very dangerous situation with a hot bike...

Can anybody make a picture of their vent tube routing. My problem is that is if the vent tube is going all the way to the front tank vent, you will end up with fuel in the vent tube which blocks air when refueling (so fill goes even slower). Now i have a small tube as vent which I block off...

Hi. Does anyone know of the PC Racing carb vent system/box? I ordered it and it arrived in the mail, so I installed it and followed the instructions step by step and double checked. As the instructions stated, I connected the middle part of a 'T' piece to each of the 2 side vents of the carby...

Hi All, Can anyone give me some input? I have a 2011 FE 570 and would like to remove smog canister and valve. What is the best way to vent the fuel cap?

Question to the world at large: On my bike there is a vent tube hanging down just under the swing arm near the bottom shock mount. Or so I thought. When I look closer I notice it's actually plugged off there. There is a black plug in the end of that line. I removed it today and a little gas...

Hi friends again: It´s almost 2 years since I changed to Husaberg and I am using this free consultation service. I am glado to say that I am thrilled and extremely happy with the 2 products (my bike and this page). I´ve read a couple of times, that people take out the OIL VENT LINE OUT OF THE...

does any body have any experience with this vent system? http://www.pcracingusa.com/carburetorventsystem.php . seems hard to go wrong for $18. bogged the bike out twice, once each way crossing the pack river this weekend. I'm also going to try out vikings trick of putting a shield in front of...

i'm interested in removing the vent hose above the cilinderhead (above the distribution chain). i know that the oil plug fit in properly but it needs to be machined, is that true? what kind of modification do I have to perform on this oil plug?

My bike always leaks gas when fully laid over as any kehien carb does in my experinece with huskys and husabergs, but lately my bike leaks gas out the vent tube when I lay the bike over only a little bit. A guy rode behind me and he says it was dripping gas as I went around corners and believe...

I just bought this 2002 FX650e and it runs/starts like crap (a common problem I gather from posts). I have the whole thing torn down to the frame and I am working on getting it patched/cleaned/fixed peice by piece. When I was cleaning out the carborator I realized that the two hoses I thought...

Had a rather wet ride last weekend and my bike(04 fe450e)was filling the carb vents with water and running poorly and sometimes stalling during the deeper crossings.Anyone install one of those PC racing carb vent systems...how did it work and where did you mount the box?....thx...nsman

Hey Bergoroadracer' I was looking at your gallery and saw your crank vent. I assume you have blocked off one of the vents. Any problems with presser buildup? Also Do you have a part number for your check valve. That is one of the cleanest installations I have seen. It sure would clean the...

Out of curiosity, why does the 650 have two ventholes? Is it due to the bigger volume it moves around or out of safety? We are building an 04 650 engine in a quad and the second vent tube is a bit on the wrong place. Would it hurt if we closed it completely? If I recall the "older" engines...