values

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. 0

    09 570 TPS values consistently low

    Hi All, I've got an 09 FE570 which is running like crap past ~60% throttle, backfiring and surging. Seems like it's running lean which I've chased it down to the TPS which I've replaced. Both before and after the values max out at 3.3-4.0v which is obviously too low as it should be 4.8. I'm...
    • 09fe570
    • Thread
    • 2009 570 backfiring consistently low throttle position sensor tps tps wrong values
    • Replies: 3
    • Forum: Electrical
  2. Feca126

    Best AFR values? FS 650 2002

    Installed O2 sensor to exhaust but i dont know what are the best AFR values at some RPMs for this bike? Anybody have some info?
    • Feca126
    • Thread
    • 2002 650 afr oxygen sensor values
    • Replies: 1
    • Forum: Fuel
  3. A

    2002 650fs component values?

    Hey guys i've just bought a 2002 fs 650 with an electrical fault and was wondering if anyone could give me a list of the correct readings i should be getting from all the electrical componants? Thanks in advance...
  4. zen

    Husaberg Wear Limits and Torque Values

    Husaberg Wear Limits and Torque Values From a 2001 Husaberg 400/450 Should work for other models
    • zen
    • Thread
    • husaberg limits torque values wear
    • Replies: 0
    • Forum: Service Manuals
  5. wrghtlk

    rectifier/regulator values ?

    hi im trying to test my regulator / rectifier on my 2003 501 .. anyone able to help me with values and for which pins. thanks
    • wrghtlk
    • Thread
    • rectifier or regulator values
    • Replies: 6
    • Forum: Electrical
  6. T

    Husaberg 570 steering head screws tightening torque values?

    Can anyone give me value for bottom screw? Top one is 10nm? Are there any difference beetween them - in part catalogue they have got same size but one is marked "SL" and they have got different part numbers.
    • toivias
    • Thread
    • 570 head husaberg screws steering tightening torque values
    • Replies: 5
    • Forum: Suspension
  7. 4

    Values for stator 250FE -13

    Does anyone have values (ohm) for the stator to an 250FE - 13? //Carl
  8. J

    values of ignition coil and stator

    Hi i have husaberg fe 501e (2000): http://www.motot.net/galleria/kuvat/kay ... 165918.jpg half year ago it started to twitch when i gave a bit more gas and finally it stopped working. spark was very small after that and now there is no spark at all. so do you anyone have some kind of values...
  9. E

    SEM Coil test values ???

    Hi all, First post, great site, heaps of great info, but I need some more if possible. I have a 1987-88 Swedish made Husky WR250. It has the SEM stator and coil the same as some of the Husaberg and KTM machines, History. Bike was going fine, parked up for a few months, got out to ride and...
  10. B

    stator ohm values

    i know its all on here somewhere but its making my brain hurt looking for it, what are the values for the stator windings on a 2000 engine? the stator is in the outer cover. i suspect it may be kaputt. there is a tale with this if anyones intrested, i got the engine to upgrade my 97...
  11. M

    Coil resistance values FE400E (2003)

    Anyone got the resistance values for my coil,I've got a new stator and a spark but not sure if this is breaking down under load ie won't start.....
    • matty
    • Thread
    • 2003 coil fe400e resistance values
    • Replies: 1
    • Forum: Electrical
Back
Top