unit

I replaced my fuel pump and did not take a picture of the sending unit hose connections. Can anyone tell me witch of the (2) hose connections on the sending unit the fuel hose with the filter goes on? One connection tube is longer than the other.I Thanks

Hello berg crew . As a complete noob on the subject ,I searched in the forum(old threads) but there was no specific information about the subject or with a result at least. So my question : Is there a programmable Cdi unit like (msd,vortex , ignitech etc) that is plug and play? like a ktm525...

hello ! yesterday when i was racing my bike down the road , i heard 2 missfires then the bike died . when i dissmantled the bike in the garage, i found that i have no spark , tested the spark plugg, it worked fine . so i looked att the SEM unit that i bought 2010 from taffy, messured the wires...

Hi guys. I have a husaberg fs650 03. What is this electrical unit?

After a month or two of riding the bike new, it started to reset the 24 hour clock to zero. Then it started to display the error code for replacing the battery (rb 026 or something like that IIRC). So I replaced it with a new fresh battery figuring the battery maybe went stale while sitting in...

Greetings fellow Husaberg owners, I am in dire need of a new CDI unit for my 1999 FE 501. I would be happy with a good second hand one if available. Have pity on me. I have had this bike for nearly 12 months now and I haven't been able to sort the ignition problems until now. Imagine having to...

does any one have a head unit nut tha they can sell

Hi All, after searching the forum (and according to my dealer) I found that I seem to be the only person whose Berg loves to kill flasher units. I am thinking about trying a full electronic part which cannot be destroyed by vibrations. Did anyone else have a similar issue before? Thanks in...

hi everybody need a little help. when removing the rear shock from my 02 fc 550 is their anything else other than the top bolt and the one inside the swinging arm hold the unit on (is their a sleeve going thru the bottom link in the swinging arm) thanks mark.

I recently took in an orphan FE-501. The ignition was cooked, so I ordered a new SEM unit complete with flywheel. After piecing together what info is there for pre-99 stuff, all I know is the timing is to be set at 35BTC, but in typical European fashion, how to do this is not described. I...