turning

Hey guys, I've had a question bugging me for a while. Is the 628 crank, conrod and piston a bolt-on part for the -04 644? Thinking of doing this once I get rid of the 644 crank. It should last 100 hours more, will see if that's enough for the short but cold finnish summer. :giggle...

Hi all, I've recently acquired a non running FE450E which I wanted the wheels and a few bits and bobs off. I've now thought of modding the forks and/or RSU to make them a spare set to make my FE550 a bit better when I've got the supermoto wheels fitted. Can anyone advise me of some useful...

I was going to adjust my settings a little and noticed that my right fork top adjuster won't stop when turning clockwise. Any clues? Thanks

I went riding yesterday and my front wheel did not seem to get a good bite like usual. I had swapped over my KTM wheels that had new tires, but a one tooth larger rear sprocket. By moving my axle forward to adjust for the sprocket, did I screw up my settings so bad that I no longer have traction...

2001 fx470e when I push the start button the relay makes a clicking noise but the starter does not spin.I bypass the starter relay and connect 12 volts to the starter and nothing happens the voltage drops from 12.5 to around 5 volts.I remove the stater and connect 12 volts and the starter spins...

I need help from the Guru's. My starter motor only works sometimes. Other times it is as dead as anything ' meaning nothing happens when I touch the e-starter. If I move the kick starter a bit or put the bike in gear and move it forward and back then she starts with the E-starter. I have had the...

just changed my oil twice and it keeps turning almost black.... any ideas???? keep in mind i turned it upside down in some muddy water... but its running better than it ever has since the tump... more bottom end and way easier to crank (3 or 4 kicks)...

I tried Berger's 496 and it has a much much nicer turning ratio than my 2001. How can I improve the way my bike turns? I don't expect to make it as nice and easy to turn but any advice would help!