tuning

Hi, I'm Peters from Germany. Owner of Company FP-Engineering. We have many Tuning parts and Spezial Parts for Husaberg. You can Check FP-Engineering GmbH Fahrzeugtechnik - Home Regards Peter

Hey up! Just to let you all know that I'm in the slow long slog of tuning the standard 40mm carb on the 650 2002 model I have here. as many of you will have seen on my Facebook page, we had the NTB650 starting with virtually no choke. if this can be cured it will but it will come...

been a 2 stroke man most of my life, got a bit of catching up to do with these modern 4 strokes the TPS om the 570 do I need to play with it.. Iam pretty fussy on jetting etc and Iam fitting a Fuel Air ration gauge atm and have a Vortex ECU on the bike as well can anybody point me in the...

Carburetor Tuning Calculation Chart For FCR, CRS, PKW, PJ, PE For carbureted Husaberg motorcycles

Late 2013 I got the "brilliant" idea of investigating how to go about tuning my 570FE. The bike is used for ice racing so the OEM engine setup is, to put it mildly, boring as it falls on its nose just as it gets fun. So I did the usual, poked around and asked questions, dreamed a bit, more...

I have a few questions: I have a 2011 FS-570 With a recently rebuilt motor. Top end/ bottom end, the whole damn thing!!:mad: The only thing my mechanic did differently was to make the Throttle Body a little bigger. I also took the bike to the local KTM Dealer and had "the only map they...

Anyone done any tuning on the 650? Cam? Big bore? High comp piston? Looking for a bit more power for road racing only.

Hi, I have a 570 and it was delivered to me, as new, without restrictions and with the dealers own competition map in the ECU. As an enduro it is perfect, just as I like it. They have taken the curve and made it as linear and predictable as possible to not tire out the driver (just as you want...

I have a 2010 FX450 and am looking at purchasing an akro factory slip on like the one listen on the husaberg site as an upgraqde. Now, I've only had carburated bikes in the past and always had to re-jet the carb to ensure the bike would run at its best after a pipe change. Is this something that...

I just had my forks and shock tuned by Factory Connection - new springs (for my weight) and re-valve. So amazing to enjoy that magic carpet ride! I simply could not find the limit, this suspension setup just soaked up everything in its stride. Highly recommend to anyone to get your...

Hey guys, I'm new to the forums but not to bikes or cars. Just to give you some background information, I'm a mechanic for a living and a mechanical engineering student. I'm not a carburetor expert as us new automotive guys are never trained to work on them, but I've gotten pretty familiar...

Hello from the new home of Husaberg, Austria! ;) My name is Christian Eszterle and I joined this forum because it is the only one I found where some guys which seem to know something about the new EFI are. I hope you can help me a bit ... :) Please don't get mad if there's already a thread for...

So guys, What can be done to a 570 motor to get more power, or make use of the power its got better? I know about the easy bits like opening the airbox, dna filter etc. Bike is a motard being used for race and would like some simple and effective things to get the most out of it before having...

I have been working hard on getting my FX 450 ready for our HS season opener and have noticed the suspension was very good everywhere but in the bigger whoops the bike or chassis has a trait of pivoting or porpoising front to rear which affects being able to ride in an agressive mannor. I have...

I've mentioned these in the past, and a few members have been along, or got Frank to run one at their place. Frank's CV includes everything over the years, and he currently has 3 2009 Oz roadracing titles and will likely add to this in 2010. He has enduro, MX and short circuit in the bag too in...

I have a 97' FE501 with the PHM40 ZS carb that is running way too rich for my altitude (I live in Colorado at about 8500ft. above sea level). This is the second year I've had the bike and it ran OK when I first got it I had to turn the mixture screw all the way in, and back off the idle screw to...

I read a lot of throttle body porting, and some about replacement throttle bodies. Suppose I'm considering tuning the intake - what is the easiest way to go about it? Are replacement throttle bodies easily available? What is the porting to the throttle body - just smoothing the surface areas...

I bought a 09 570 and already had an Ackropovic muffler which fit the Berg from my last KTM. I asked the Dealer where I bought my bike whether it needed to be tuned, and he said no. I personally thought that the bike should be tuned to the new muffler. The bike tends to stall in some low speed...

has anyone done any serious tuning on the '09 450 yet? level we're talking about is to run with top class 450 mx bikes, or at least get closer to them.

Hi all,have just got my first berg and loving it. Been reading all the posts I can and believe that I should be changing the setup of my carb as it has idle overun when warm and feels a bit sluggish. Settings are as follows main air jet - 200 slow air jet - 100 needle - DVR Clip 5...