transmission

What are you guys using? Brand and weight please... I did a search on the forum... I didn't find anything. Thanks

After my lap I noticed that with the bike off and in neutral the transmission is noisy. I noticed the chain a bit tight, I removed the chain and it seemed a bit hard to bend so I will wash it with diesel and dry it and finally grease it, once mounted I will adjust the chain play. But now I have...

Does anyone have an address for a gasket manufacturer. Need for the transmission cover. And the head gasket .

Hi, My recently purchased 2008 FE550 has a bit of weirdness with the transmission. I can find neutral fine with the engine off. When I start, then put in gear, no problems. But while engine running, 1) can't shift back into neutral. And 2) when running, in gear and clutch in, it...

just a few questions please . i have a 2014 te300 husaberg 1. what transission oil do i use 2.how oftern do i change it my local bike shop MCAS gave me bel ray 80W transission oil . will this be okay ?:(

hello! I have done a full rebuild of my Husaberg fe 400 2000. I have changed all the bearings in the cases, and made sure that the bearings where seated all the way in. I double checked the manual regarding washers and gears on the shafts so that I had it correct. The manual says that all 3...

Hey Guys, Guess this is my first post but loving my Berg!!! Riding in Colorado a few weeks ago and sounded like 1st gear was shearing. I immediately took it back to camp. I was having some clutch issues (not bled properly) and think that played a role. As clutch released and gear engaged...

having a problem fitting case halves together on the gearbox side, seems to shift tight once bolted down,, first i drop in the gear shafts with gears into the left hand case, fit in the drum and selector forks, turn the drum and it shifts nice up and down threw the gears and to neutral...

Hi, are there a seperate oil for the gearbox or is it the same as the engine oil ? /Newbie

Wonder if anyone has an view if this is a problem..... My 2011 FE570 is a year old, I'm the second owner, 130 hours. I've observed that there seems to be some slack in the drive train. Between throttle on and throttle off, there is a noticeable 'clunk' (not enough that you assume there's a...

Sooooo just got round to my first transmission oil change for my 2012 TE 300 (Which is ballistic btw :P) and read in the owners manual that Husaberg recommend using Top Speed 4t 15w/50 motorex oil, but the oil recommended is 4 stroke oil, can anyone shed some light on this for me, and maybe...

Most of this info is in the owners manual, but not the final ratios, which are sometimes useful for comparison. I calculated these to compare to the final ratios of an Aprilia RXV to post in a thread on Thumpertalk, so I thought I would post them here to to save everyone else the trouble. Of...

Hi, Due to cracked gears I need cheap second hand transmission gears for my engine.I am not sure if any KTM gears are interchangeable with my '03 FE400 but maybe I can change gears as pairs to match teeth if they are compatible with my main and counter shafts (I mean if the distance between the...

The six speed trans is giving me problems I suspect shift forks but wanted any opinions. My bike slips into what seems like neutral , if I hold it in 1st with pressure down it will go, if I left off the gas it is in neutral again, go to second or 3rd or 4th if I don't keep pressure on the shift...

Can any give me some insight as to what I'm going to encounter when I remove the transmission cover to install a new gasket. Do I need to drain the radiator or do anything else before I remove this cover. Also while I have the cover off, what types of things should I inspect while I'm in there??

:D i've recently had the bike jumping outta gear again and thought nowt of it. as usual it was going to be either the post that sits in the middle of the selector fork that was loose, or the selector 'star' itself. this had happened at hawkedon my last but one race - the centre post...

Hi guys, this is only my second post on here, and I have an odd question for all of the berg buffs out there. I am needing to replace the sixth gear on the mainshaft of my 97? 501 FC. I say 97? because I only know that it is kinda old but newer than a 96. I talked with Motortoxica and they...

I have a 1997 FC501 and it has a close ratio transmission. I was wondering if anybody knows if I can just change fifth and six gear or if I need to change all the gears? The reason for wanting to change to a wide ratio gear box is because the bike is daul sported and while going down the road to...

I have been chatting with a good mate and he can have machined the full Clutch/Transmission case. Details are. CNC machined polished aluminium. Fits 01 - current Berg (need to clarify 04, but defo the others) Will have separate clutch access similar to the 04 but in polished CNC machined...