tip

Hey All, Had a tip over then bike would not start. Got it home and replaced pump with Cacycle pump but still no or very low fuel pressure . I am showing about 1 bar or 14 psi while cranking and then pressure falls to zero. It appears to be pressure regulator bleeding down not holding pressure...

I've had a couple flaps wear through due to higher speed road riding. I bought a Cycra rear flap and it turns out to be made of plastic rather than the rubber KTM uses. I thought I got screwed, but turns out the flap works like a charm and doesn't flap around. It does exactly what you expect...

Anyone ever experienced the following: My bike takes a couple of minutes to start after being tipped over. I feel that the seal in the fuel pump may be failing.... After letting it stand on level ground for about 2 minutes the bike will restart. the pump is running when i attempt to start the...

Just returned from our RIP, Tecate to Cabo. Bunch of KTM's a few Yamahas and me and my Berg. Well I'm here to report the Berg was the best!!! 1583 miles no flats, no breakdowns of any kind. Here's some pictures from the trip. http://gcandmc.smugmug.com/photos/swfpo ... Key=kwB3ZC

Has anyone replaced the rear brake tip on a 2010 fe for a larger one.. I know you could get larger pedal tips for the exc's and was just wondering if they would fit an FE 450

Hi guys, just came back from a trip from the algarve in portugal. http://Algarve-offroad.com has a setup there with 6 new generation husabergs, the 390, 450 and 570. So if you just want some fun and/or curious about these bikes, go check 'em out there! The owner, known here as dustbite so i'm...

Does everyone take the perforated screen out of the end of the silencer? I'm sure it keeps the sound down but it sounds like a running a leaf blower through a straw.

Hi everyone. There is a little wear on my auto decomp tip. I doubt putting a small weld and reprofiling a suitable way to remedy a worn auto decomp tip since welding may ruin toughness of steel. then would it not be more vulnerable to wear? It make sense for a temporal cure. Any comment from...

Hello all, I just bought my first Husaberg, 05 fs650e,brand new. I've always wanted one but could never afford it, not that I can afford it now either but I finally said piss on it and bought one. Have'nt even been able to ride it yet, due to all the snow. Just sitting on it and drooling so...

Hello all I searched and came up with nothing, is there a replacement tip or extender for the rear brake out there, has anyone done this yet?? Seth

I all, how do i perform the maintenace plans and time periods, for a dual use 00 berg. I want to rode in street in the summer, and off-road every weekend. I'm newbie in off-road riding, so it wont be very hard core rides... simple "walk on the country"... i'll setup a digital Km...

FYI in case your interested, a shop rag works very well to keep parts (bolt and nut) from sliding down the swingarm when removing the shock on the PDS model bergs. Just stuff a slim rag down the insid tube of the swingarm leaving just enough to pull it back out, this should insure that any...