thoughts

Edit: Got my answer from Taffmeister re: the cam wear. But I'll leave all this up just in case. He stated it's fine to use. After some disassembling I discovered I had a broken intake valve (right if sitting on bike) and a beat up shim laying in the head. But no other damage so far including...

I am considering buying a 2010 Husaberg FE 390 it has around 130 hours on it any thoughts on this bike? I know there are allot of considerations but generally speaking what do you think it would be worth? I know they do not make the 70 degree motor anymore so my thoughts are its resale value...

I recently sold my 2007 Husqvarna TE450 and am considering purchasing a 2013 Husaberg FE350. The bike is about 10 lbs less which will be nice in the woods. However, I do worry about top end power. I was able to go 90 in 6th easy and could top out at 100+. That being said, I did not need all that...

This is off topic of what this Forum is all about, also so with the posting I have done and with the help of Taffy's off topic slander. I find it funny that only one person actually got all of this "Thanks Tourist" :) Out of all this I have found that out of 11758 users only 10 have...

From the soup: "Noyes In Coma After Spanish Spill by staff Sunday, July 05, 2015 Kenny Noyes, the reigning CEV Superbike champion, was injured in a crash today in Spain. Noyes is the son of motojournalist and writer Dennis Noyes. Noyes and his bike went into a barrier at high speed...

Hi there folks, Just some spitballing. I would appreciate your thoughts on my thoughts so I can think about your thoughts. The situation is currently that it would be beneficial if I could make some beans from the comfort of my home so I put on my tinfoil thinking cap and thought long and hard...

Hi its time to replace the rear tyre on my 570, I mainly ride rocks and gravel with a bit of hard pack dirt thrown in, the burg had a Kenda carlsbad on it when I bought it but it shredded it pretty quick so has any one used a Michelin M12XC on the rear in these conditions, thanks for your thoughts

Well, Ive put some hours on this bike and have some comments. Stock gearing is ridiculous, so I dropped the front sprocket down a tooth. I don't need to go 90mph on street or dirt. The seat is a 2X4. The clutch is worthless until the engine is hot, stalls when shifted into 1st every time when...

I'm looking at getting a G2 Throttle cam on an 08 450 FE, but wondered if I could solicit some input. I'm looking at the cam to help smooth out the throttle a bit as I get bounced around on the trails - it would seem the flat spot would allow the throttle to be moved accidentally w/o lurching...

Hi all, Might be looking at upgrading to a new berg in a few months and wondering what peoples thoughts are on the new FE's having CC forks now? Will it be a decent positive step compared to last years OC forks? I have very limited experience of WP CC forks so just after a little info. thanks

My friend has a 98 FE501 that I was thinking about buying off him. One problem it has is that the electric start slips and won't disengage. So now you can't even kick start the bike, I have rode it before when it was running and the thing had tons of power. So what are the major issues with this...

you're rebuilding the LHS cover of your engine and you need to tighten the gear nuts so you use the half spreed shaft as a lever, a place upon which to rest your bar? second scenario you put the two nuts on the two gears the wrong way around so the recess faces up. next thing you know...

how many of you have used a strobe to set the ignition timing and if so which and what line did you go to? did you half the figures as suggested by lineaweaver? did you try full advance or just at idle? i've found that this doubling figure screws with the RPM and the advance...

Would This Destroy The SEM And Starter Systems If I Fitted This To The Berg,Or Any Bike For That Matter? http://knightbatteries.com/popup.cfm?p_ ... p_i=298012

i have an 02 470 and i have some "updated" rockers that i bought as preventitive maintaince. as i have not compared them side by side to the updated ones...what is different between them? also what actually fails regarding the rockers...the roller? if the rollers are prone to fail.....it...

Anyone considered making the SEM stator oil bath? Did KTM's have the same issues with their SEM ignitions that were oil bathed as the Berg's are having? I'm just pondering the idea of converting the Berg over to an oil bath design. Anyone care to share their ideas/experiences? :)

My Son Has Just About Had Enough Of His Gasgas 400. He Really Envy's My FE400. My Question Is,What Model/Year Should He Get?. We're Going To Be Doing Mostly Woods Riding. He Likes A More Motocross Feel. Its Gotta Have 6 Gears And Be Road Legal. :?