thing

I picked up an 05 FS650C in Seattle a few weeks ago. It runs well but the wiring is a mess and it weeps oil from a few case bolt holes as well as the bottom seam between crankcases. I'm watching the oil level like a hawk and plan to try and tear this thing apart at the end of the summer to...

http://usstudents.org/123moviesr-watch-deadpool-2-online-free-and-full-movie

Has new valves fresh piston new gaskets fresh carb rebuild set by manuel valves set by manuel timing set tdc cam lobs 11 and 1 great spark will not start did i miss somthing

I recall getting gas on one of my motorcycle trips, and as I'm fueling up in my full leathers, I heard the cager next to me comment about how ridiculous my gear looks and I must be stupid for wearing it in 100+ degree weather. I wanted to respond "well please stop trying to kill me on the...

I own (for my sins) an 02 fs650e ... after sending it away to dave clarke racing for a refresh and couple of other bits like the fork seals and stuff the bike run ok for a couple of rides then dropped the teeth on the starter motor gears, dave replaced those only for it to happen again, the bike...

hey, just changing the fork spring on an 09 450 and when removing the cap it left a brass threaded thing with a slot in it on top of the damping rod? upon trying to re thread it into the cap it come against the male part of the clicker and becomes a pig? any tips? and is it right that it...

I got a 2011 FE 570 S and it has the emission thing hanging out the side of the cylinder. Has anyone put the plug (that comes with the bike) in. And does it improve the performance or change it? Thanks Also I found an article about the Dirt rider guys doing it, here is the link...

Hi there everyone, I'm wrapping up the admin side of the classifieds and am almost done with the automation of user donation ranks, and will be ready to start on the next big thing for the UHE. There's a story my dad used to tell me about a guy that locked himself in his garage and designed...

Hi guys I whant to share this with you, I rebuid a FE400E_02 from scratch, new paint, new plastics, new wiring, all of Taff mods to the engine like a torque cam, new autodecomp, dual spring kit, ported head, new piston, new conrod, beefy start, taff sledge, stator from sparks, new wheels, new...

Hi, wondered if anyone could help, I have an '08 FE550 and it died at my last enduro 10 minutes in and wouldn't restart. (Ran totally fine before.) At first I thought it was just a fuel blockage from dodgy petrol as I found white deposits in the carb from brand new fuel I'd put in. I cleaned...

Guys, sorry but i just do not get this whole torrent thing, its totally lost on me. Is there somewhere that has a plain old download for the 2009 FE570 workshop manual??

I got this bike home today. Bought it as is for a too good to pass up price. I had no pressure on the clutch so I tried to back bleed it and it will not even push the smallest ampont of ATF fluid through. I had the resivior cover off and the bleed nipple cracked open and checked the hole in it...

My 06 FS650 with just 20hrs on it just underwent a complete jetting makeover - more on that after I figure out how it is working, but when I went to start it on the button the starter would initially engage and then spin free. Over and over and would not stay engaged long enough to start it -...

For years I've been doing rebuilds on my engines and every time I ended up with a spare o-ring. Diligently kept each and every one of them in a little bag wondering what the parts guys in Sweden were on. Then I decided to convert my FSc into and FSe, bought an old electric start motor from a...

I am giving notice here now that I am going to part out my 02 FX 650. I can't keep dumping money into the frickin bike. Brand new Maxis knobbies front and rear, GPR stab, engine is good shape, needs new piston, Big Gun exhaust, kick stand (not even used), FCR carb, Renthal Fat Bars, aux tank...

I know some of you have already answered this in the past but I am a little confused about the exact methodology one has to use in order to change the cam chain without screwing up the timing. I have a new chain, with the proper number of links per the manual, a new, updated, lever and a new...

I bought a 2001 FE650 about a couple of months ago.......and there is one thing that really suck with a husaberg.................................................................... HAVING TO WAIT A WHOLE WEEK TO GO RIDING ON THE WEEKEND!!! I've had bikes before, but NOTHING compares to the...

History: I bought a 2001 FE400E from new and about 1 year into owning it I had all sorts of problems with the e-start not working. I did all the normal things listed on the forum - valve clearances, improved grounding of the battery etc. So, I updated the battery to a Yuasa YTZ-7S (more CCM's)...

Well, Yesterday, I got my head into shape and decided to set the sag settings on my FE550e '05. It took about 4 Hours tops from reading all the relevant looking forum posts here on UHE, and going over the manual, and some testing. I am BLOWN AWAY at the difference that such a small...

The pinned map is a great idea! I'm looking forward to seeing the map bristling with pins. Thanks again for making this a great site. :wav: