tech

Hello folks Opologies for my ignorance but when you change the settings on a trail tech map switch are you supposed to stop the engine first before changing settings...also what does the small square button do on the selector switch do Thanks very much

Hi Guys, Looking to purchase a TT Voyager Pro for my '12 FE 450. Have any of you installed these units (or the voyager)? What mounts will I need and can I use any of the sensors already on the bike for the Voyager? Also, What are you guys monitoring with your units? Thanks in advance...

I recently picked up a minty fresh 2011 390 and would like put a fan on it. Has anyone used a Trail Tech digital fan kit with the adjustable digital temp trigger on their 70° Husaberg? If so, can you tell me what model you used? It sounds like there could be clearance issues and I'd like to...

I have a Trail Tech X2 headlamp for sale. This light came with a 2011 FE570S that I recently purchased from a fellow board member, but I am going to run the stock light so I do not need this one. I'm not sure what models this will fit, BUT it plugged directly into the harness on the 2011...

Hi all, Wheres the old tech doc, about the various older models, mods etc.. Cannot find it anywhere. Kind regards from Anders

Can anyone recommend a trail Tech for my bike? Regards, Ketil

Hi, looking to upgrade the stator on a 2008 550 FE I contacted TT and they did not know the exact one to sell me. They suggested finding someone that has done this so I would purchase the correct KTM part # I know, but that is what they said. Looking to increase the output to run HID lights or...

Hi all, I've got my Vapor running perfectly, and after receiving my billet protector from HDB I'm now on to installing the Trail Tech Dashboard. Has anyone else done this on a 2012 390 or equivalent, and if so, any hints on how you wired it up? Here is the cabling I have figured out so far...

So, first things first. As this is my first post I would just like to say hi to everyone here at Husaberg.org. I've been considering replacing the stock bash / skid plate on my 13' TE 300 with the Pure Tech aluminium one (80303991000). Does anyone have one of these on their bike and would be...

I have a 02 400fe, and wanting to get a Trail Tech Vapor computer. I can not seem to find the one that i should get for my bike. anyone help me out with this? Thanks

Has anybody attempted to install a trail tech X2 on a FS570? I know they make a kit for the FE, but after contacting trail tech they said "The harnesses are a little different from each other and then the mounting is completely different." Can somebody with an FE chime in on the wiring and...

Has anybody attempted to install a trail tech X2 on a FS570? I know they make a kit for the FE, but after contacting trail tech they said "The harnesses are a little different from each other and then the mounting is completely different." Can somebody with an FE chime in on the wiring and...

My long awaited X2HID light from Trail Tech showed up today. From everything I've heard,this light would be the perfect addition and finally make night time somethink more than a gray time with slightly wierd shapes floating past my peripherals as athat is about all the factory headlamp is good...

Wow. Super lame that they leave the 2009/2010 users, who have the exact same fuel problems, out in the cold.

Anyone have one installed on an FE? Do you like it? Could you send pics of how you mounted it please? Thanks, Tim

Just some pics to cause massive drooling :mrgreen:

Has anyone mounted the X2 HID on the 2011 street legal FE 570S? A lot more wires to contend with and appears more difficult to attach to the fork tubes with the upper light clearance issue. If anyone's done it successfully, I'd like to know what you did. Thanks.

http://www.systemtechracing.com/ I recommend John Bruckbauer and his company, System Tech Racing. I have no affiliation with Mr. Bruckbauer other than having purchased several of his creations for my FE570S. He is the inventer and patent holder of the push-button fork bleeder, a design that...

I'm curious about the ignition map switch that Trail Tech sells. http://www.trailtech.net/040-HMS-A5C.html Does anyone have experience with this part on a Husaberg?

hello. I upgraded my regulator to trail tech because im using hid xenon front bulb. After i installed it i noticed that if i drive with lights on battery voltage goes down slowly, so it doesnt charge enough. Any ideas what i need to do to get it work correctly? only thing thats on my mind is to...