taillight

Hi, I have 2010 390FE and the headlight and taillights are not working, also when using the front brake there is no brake light but the brake light works with the rear brake…. New handle bar switch gear, lights are functioning when wired directly to battery so its not a bulb issue eithier. Has...

Got an 02 fe400 recently. All works EXCEPT I get no tail light when headlight switch is on low beam. Switch on high beam and it works fine. I tested the switch and everything seems to work properly. Any ideas on where the circuit may have failed?

looking for anyone who has one of these tailpieces on their bike/ probably a 1990-1996? do you have it with the taillight? cheers taffy

below are three images of the same rear plate and light holder. I can't see a single photo of this set up on Google images? has anyone got a decent 'tail-on' photo of the rear taillight assembly with this mounted please? it's down as: 1994-1996 holder license plate H160 120 01...

I am wanting to hook up my rear LED taillight to my Berg's newly installed hydraulic brake light switch. Can someone provide me a diagram on how to do this? Taillight has three wires: 1. Black wire=Ground 2. Red wire=Power 3...

I'm looking for a non OEM tail light option for my FE570. If you have any options or ideas please post up. I found this Polisport but not sure if it will bolt right up and be solid. Any experiences?

Hey guys Bought a Fs650e a while back and have been in love ever since. Recently injured my knee so while im off riding i have stripped bike to a frame to fix everything and make it brand new. Just before i stripped it down i noticed headlight was dim, so i got out multimeter and checked...

My taillight wont work, only my brake light... Checked everything, but i can't figure out what the problem is.. Anyone got some ideas?` It's a fs650e 2007.. Probly not the original light

So this is hopefully the last of my troubles, As it's the last major thing that needs to be fixed apart from the water pump seal. Basically my brake/tail light is very very dim, And I think is getting 0.5 Volts (not sure) Can someone tell me how to correctly test it with a multimeter...

My headlight, taillight, and licence plate lights don't function. The #3 fuse is OK. There is no 12 volts at the #3 fuse. Everything else is good. Any ideas?

G'day, I picked up a 04 FS650e a few days ago and I immediately stripped it down to give it a once over and also fit a few parts. One of the things I am doing is fitting a 08-12 KTM headlight and a generic LED tailight and I have a couple of wiring questions. I know I am not the first to do...

I am installing head and tail lights on a 09 450 that didn't come with them. Do I drill a hole through the subframe for the wires, and on which side, or do the wires go through that black plug in the center of the subframe. Mine does not have any holes in it but I do see 2 rectangular spots in...

For reasons that are not 100% remembered by me, the taillight wires in my 2005 fe550 end in snipped wires instead of in a little socket i can put a light bulb into. Most of the time, no worries, but I got a street license plate for the bike, so I'd like to be able to turn the light on, just in...

G-day Berg'ers, my first time online, so am getting used to the whole deal... has anyone fitted the 2006 taillight extender to a previous model, i have the new extender to fit to my mighty FE550e, but would like to know what I am in for before spinnin' the spanners. are the exploded assembly...