suspension

Did anyone put aftermarket suspension on their Berg? Will other suspension fit the triple clamps or I need triple + front suspension? Anything helps

Just ordered a full rebuild kit for my forks. What oil height should I aim for? Can't seem to find any relevant info on this topic. Besides that, anything I should particularly watch out for? Thanks

I’m in the middle of putting new fork springs on my buddies berg. The springs I ordered are 43mm x 505mm which from what I can tell matches the service manual for the FE models (open cartridge forks). The weird part is the springs that were in his forks measure 43mm x 485mm, which seems like...

Hi guys! I have a 2004 650 FS, and struggle a bit with high speed handling. From 110kph the front becomes lights and tends to "swerve" left to right, making it a bit scary. It's not a proper wobble, it starts progressively. I tried sitting closer to the front etc, the only thing to calm it...

Hi everyone. I've recently redone my bike and after tightenig all screws when fitting the exhaust pipe, I've realized that the exhaust touches the spring of the rear suspension. Can anyone tell me if that is normal cos no matter how I install it, it always end up hitting it. I've followed the...

2010 fe450. Changed tires a few times, changed for heavier and lighter spring rate, tried increasing and decreasing comp and rebound damping, nothing seems to help. For most conditions I love the handling, but here in the PNW, we have a ton of FSR's consisting entirely of 4-8" diameter gravel...

iv had a quick look around and not finding much on this. My fe obviously has enduro suspension but now its duty is supermoto on road is there much that can be done to the suspension or are there spring and valve kits available to buy? Be great if anyone who has done the swap before could chime in

newcomer Hello there! Long story short! I was looking for some Husaberg closed cartridge setting lists but I couldn't find them here (or anywhere else on the internet). So decided to ask my Husqy dealer and he gave them to me but then I thought that other people might need them so I...

At the beginning of my membership here I had a 99 fx600e. I traded that bike for a 2001 fx470e. After much tinkering and carb rebuilding That bike is starting and running well. It is fun and easy to ride, however the rear shock seems to be very harsh. I ride sandy dirt roads and cow trails here...

I can't remember the last time i asked a question instead of answering one! But anyway, what is the spring rate required on the rear of an old Husaberg with the linkage system? SAG settings? Some of your own experiences? cheers Taffy

Hi The rear shock on my Berg is way too firm, I'm 80kg. Going to play with the rebound and comp but would like to know how many clicks should it be in stock form and work from there. Riding is more dual sport type terrain so not too hectic.

Hi, ive got a 2010 FE 570 and want to do a suspension upgrade, are the 2010 and 2011 models the same in the suspension setup or was there a difference in them. The bloke im getting to do the upgrade cant get any info on the 2010 but can on tne 2011.

Looking for some WDS forks? Prefer vgc radial foot for sm caliper, axial mount would also be considered

So now I'm once again vacillating on the:sell or keep the damn bike.:spin: I've all but sworn off riding on public roads, and I'm having a hard time parting with the Berg. I was going to buy a 300 2T and carry on with the trails, but the 570 is an impressive machine there too. Anyone...

Hi all. Just embarking on a build project and printed off the service and parts manuals. On the back sheets I've seen that the fork oil should be done every 20 hours. My bike is a 2002 and just used as a road toy. Is every 20hours really necessary? I haven't done them this time I've owned...

Just trying to compile some information together and asking for your guys setups. For Reference, my bike is a Husaberg FE450 2013. In the manual it suggests 33-35mm of sag, and 105-115mm of riding sag. Have any of you deviated from these measurements, if so why and how has it changed...

Hey everyone I just recently purchased a 2006 FS650 with a supermoto conversion and I was thinking of tweaking the suspension a little. I am around 80 kgs and would be doing the majority of my riding on the street with an occasional swap to knobbies for some trail riding. I have not done any...

Can anyone offer some advice on why I get the rear end kicking up when I go over most jumps rode a motor x track at weekend and felt like I was ridding a wild bull getting nearly buck off at old stage. I have to let off the power early and ride over the jumps to stop the kick back when I leave a...

Does any one have or know where I can find the stock suspension settings? The number of clicks for the rebound and compression. 2008 Fe550 Thanks

Hi! I have bought an old ('99 I think) FE501 bike, with the rear shock missing and the swingarm broken. Dont worry, it was dirt cheap :D but I would need those parts though. Are there any other models with compatible rear suspension? I heard that later Berg and KTM models share the same rear...