sump

Can anyone tell me what sump plug I can exchange for a 2004 fe450? The original ones seem to me quite scarce. Can I exchange with ktm or husqvarna? And what are the measurements? Mine is stripped and unrecognisable. Thanks Brenden

Hi new to the forum just wondering if any one had one for sale or could point me in the right direction were to find one its for a 450 fe 2004 cheers dave

Have the classic problem of the sump drain thread being damaged by over-tightening. Not a disaster yet as holding ok and only a tiny drip but want to get it fixed before disaster happens! Favor the Time-Sert route (over Heli Coil) but want to know if it can be done with engine in place or does...

I don't know if this has been posted before, Thought i would pass it on to you chaps you can never have to much Blue Bling :bounce3: http://www.amazon.com/Husaberg-390-Skid ... 319&sr=1-2 http://www.amazon.com/gp/product/images ... automotive

hello everyone just wondered if anyone has any ideas my 06 fe has a leak comming from the seam on the oil sump . i know to fix it properly would require a full strip down but as the bikes running fine i really dont want to do this. ive tried covering the seam with all kinds of e- metal and...

Gday, I have recently bought a 04 FE450. It has a flogged out thread for the sump drain plug. The plug that is in is a tapered thread brass thingo,it seals, but does not have a magnet. Has anyone got a fix so that I can install a magnetic plug?? I am thinking that having a magnet is...

hi guys, i'm new to here so sorry if this has been covered before. does anyone know where i can get a decent enduro sump guard for a 400. thanks for your time

I own a 2001 FE650. The other day I was changing the oil and found quite a bit of shredded rubber on my pickup screen. I have checked the external seals and found no leaks. I replaced the lines to my remote filter and cooler and cut open the old ones. No deterioration there either. There is...

Hi Bergers, Thought I'd start another thread on this, although there ar already numerous ones on UHE already. As I guess many of you are aware already if you have been reading http://www.husaberg.org/index.php?name= ... torder=asc I have had a few issues with WP leaks and others on my 07 650...

Some might of seen this but for those who have not www.hydedevlopments.co.za make a plastic sump guard for the Berg ,I have seen their products around and they don’t look too bad, could do with some careful de-burring to improve the end product though, The plastic is about 3mm thick and...

new husaberg owner here.finding this site superb and very informative.the berg in question is a 2003 fc550 .havent had it long and it has sprung an oil leak from clutch cover[above the kick start] no problem i thought untill went to drain the oil.the sump plug head is completely rounded...

http://cgi.ebay.com.au/HUSABERG-SUPERMO ... dZViewItem Keep an eye out for new listings of this guard if you want one. Although it says 2002 onwards, I just got one of these for my 99FE and it fits it OK - see my gallery. I paid considerably less than this for it but also had the airmail...

at 150 hours i decided to inspect the sump plug magnet after every ride . i have noticed at the end of the last 2 rides the presence of metal , at today's inspection it told me one thing . REBUILD TIME this 04 FE 650E goes strong , but it is becoming loud mechanically . i...

well dropped the oil on the berg last week and got a shock lots of what looks like bearing material on the sump magnet, small shiny slivers of metal. 8O got to say the bike has had a hard season and a half but the valves are checked ,and its oil dropped every second ride .ive got three good...