style

Swedish made.As old Husabergs do. I bought it second hand from a Suzuki B-King owner,it didn't match with the rest brake system of his bike. You can adjust power level and grip reach while driving,no tools needed. ISR finally meets Berg,her family. Part number 21-012-OA(Right Hand)...

Hey all It was hot, dusty and the light was lousy for shooting a video, so I fell on my a$$ a bunch to keep it entertaining. https://vimeo.com/132623929 Enjoy Looki

whats that about a photo and how many words? Thats Mount Rainier in the background... (Right click and open in a new window or new tab on the photo if you want the full size - these photos are LARGE) little exploring with my bud (FI KTM 500 EXC)- wow is my FE550 AWESOME :cheers...

Hi as anyone ever found other discs that will fit the old husaberg disc bolt patern?????????

Lets share I'm in the process of instaling one FCR in my 02' 400, in this I'm having some difficultys, one of them was all that wiring and the starter relay. So, because we BERG owners are a bit special (crazy :mrgreen: ), I've decided to change (again) all the wiring to the other side of the...

I was very enthusiastic about the yellow and blue bikes and bought a FE550 model 2004. :) many years ago I rode a KTM 350 2stroke but age makes wiser... :? but sh@#T happened after 4 rides the bike stopped and didn't start again... :evil: the bike did only 70 hours and people warned...

I'm wondering if there's a way to fit the newer (2004 and up) clutch basket and plates onto the older (2002 FE501) engine. The reason I ask is because I want to put a Rekluse Pro on my bike, but they only make it for the 2004+ bikes.

hi guys dose any one know were to buy some n style graphics for a 501fc 2000 model thanks

Will it fit? anyone who knows?

once per season, with the rear tyre removed i put the rear wheel back in and check the alignment of both wheels. the advantage of removing the rear tyre is that now, both ends are roughly the same width! i get a housebrick and tie some string around it some 8" off the bottom end and then...

just to say that i have absolutely no idea what the correct chain tension is on a husey! perhaps you'd like to tell me! i have always done mine the same way and interestingly, in the IoM i showed grunt and ady my style and they'd never seen it before thus posing the idea that maybe i'm...

Hello - I recently purchased the newer style auto decompression lever ('04 and later) for my '02 FE400. In comparision to the older style that I am replacing, it is about 2.5mm shorter in shaft length - so it doesn't fit as deep into the pocket in the cam lobe as the original. Has anyone else...

98 FC 501 Well decided to take 'er on down to the local Gooding, Idaho 1/8th mile drag strip and see how she ran. Had to bail out of the first 2 races due to kick startin issues (wouldnt start in all the excitement, and I need to exercise my left leg some more and maybe do some aerobics)...

KTMs new 4 stroke apparentley: Does this mean Husabergs rumoured "new" motor could be the "old" KTM RFS :lol: Wouldn't that be a bizarre turn around !!! .

I am looking for someone to make a custom bar riser for my 2001. I am looking for someone who can make a very simple part made of steel, less than 8-inch long, with holes for the bolt on each side, and about 20mm thick. Some machining involved, not much! These are the type of bar...