stuck

Hello. I just got my first husa like a month ago. It was running fine, expect little noise at the idle rpm. Didnt wonder about it too much. Then the bike got engine stuck while driving with full throttle. Got it home and opened the clutch side. The timing chain was loose. Got the chain...

Trying to put some new pads on my rear calipers but it seems to be completely stuck on the support pins. Trying to pump them out but they just arent budging. Am I missing something? There is so much difference between the new and old pads that theres not enough cap between caliper support and...

Starter was messing up on 550 FE 08. Tried to kick it and the kick lever is stuck. Any ideas would help.

I have a 2007 550 and I had to replace the clutch cover gasket. After doing so my kick starter will no longer move. The bike will still start and run fine with the electric start but the kick starter will not move at all. Can anyone let me know what is going on here and how to fix this? Like i...

I can't get the left hand engine cover off. I've removed all the bolts The water pump cover The water pump impelllor The kick lever The kick rubber seal. The gear lever Gear lever seal It will move around the top and the back but seems stuck on the bottom front area? Any advice very much...

Hi all. So I've just put my FS550 back together after installing some Kibblewhite dual valve springs and my kick starter is stuck! I'm a bit baffled by this as I didn't touch it or remove the clutch. Had to remove the whole left side cover to fit my new cam chain but I didn't think this should...

Recently I got a barn find on a 2006 450 FE. It had sat for 6 yrs. Bought it for 900 and it has been running like a top after a couple oil changes. New tires and tubes. Last weekend, I had been stopped, shifted out of neutral, no issues. Now it is stuck in first. Have done some looking around...

Anyone ever had the clutch cover on a 501 2003 stuck on by the viewing window? Got all the bolts out and it's all loose except for round the viewing window. I'm close to getting it off with a club hammer. Tia

Hi guys and gals, I have a 05 FE550 and was doing the water pump seal when I managed to dislocate the kickstarter mechanism. Fixed that no problem by removing and re-installing the clutch, but now my clutch lever is pretty much stuck. I have a Rekluse Z-Start Pro btw, and pretty sure I...

Hi all had first break down with berg today ;( gears started getting stuff then stuck in 3rd gear drained oil looks okay took clutch cover off can see selector fork it's moving but selector barrel seems seized any ideas before I go further in and I change oil ever time out so not lack of...

I'm replacing my read pads and disc, And my 2007 FE Berg has the Brembo Brakes. I'm removed the cotter/split pin, But the "bolt" holding it in doesn't seem to want to come out.... Any ideas?

Hey guys, newcomer here. I bought a -04 fe650 and it came with 6 piston beringer and 310mm solid disk, only problem is that the previous owner grinded the caliper so it would fit the 21" wheel without binding. It got too narrow and now it has a crack on the opposite side of the piston. Now...

I’m having trouble taking my rear break apart on my FE 450 -10 My calipers are no longer floating, one of the metal pins/rubber bushings are stuck. I’ll attach a picture to show where the problem is. What’s the best way to fix this, I cant get it apart…

Hi people, Im having a bit of an issue with throttle at the moment, ive just replaced all the jets, gaskets and seals on my carb, it runs good BUT.....I took it round the block for a quick test run and when I hit full throttle it stuck on?? As you can imagine I was a little shocked, i pushed it...

Hi guys, Just trying to do an oil change on my Fs570 and the oil screen plug bolt is stuck..is this a reverse thread or something? it shouldnt be this hard to remove..ive been trying to turn it anti-clockwise to remove it. HELP PLZ!! :o

Sometimes when I shift I get stuck in between the gears as in being in a neutral gearing. What could cause this?

Ok I have taken apart my kickstart mechanism to apply some upgrades, transmission cover off, clutch of. therefore no connection between primary drive gear and the balancer drive gear. Removed the valve cover in order to inspect the auto decomp ande valve springs etc. Turned the engine and...

Hey I road my 1998 600 fes yesturday and it lock in second gear and would not come out. I got home and took the cover off and got the selector thru the gears again but dont want this to happen again when riding a long trail. Is there a part I need to replace or do I just need to do an...

After having the y fitting in radiator hoses fail on my 2010 FX450 at race a couple of weeks back and seriously overheating the motor. I had some concerns about the piston, then during an enduro last weekend it started blowing coolant out the overflow. So I decided to tear it down and replace...

anybody know how to free my caliper one of the pins has stuck on me and it wont budge even with a bar , is this a common thing ?