strip

Started to pull the motor apart to check it over, what do you reckon to this!

Bought an 06 650 at the start of the season and had it stripped to check it out, all was good so fitted new mains and rings as a precaution. First time out boiled the engine due to leaving the track and overheated it trying to get back on track!:( About 120°c!, I should of knocked the motor off...

hello all, Im new to this site and registerd so i can sap you all of your knowlage of these awsome machines, basically i have little knowlage of the guts of a berg but am wanting to learn. My berg has started smoking and tappig a bit so decided to have a go at stripping her down and rebuild her...

Hi all, about to start an engine strip this week due to the head gasket leaking on a ride the other day. As I will ahve to remove the head I thought I may as well split the cases and check the bore, piston and replace the mains, the bike has always used oil, as much as 100ml on an hours ride so...

Just pulled the forks on the 09. I have a new set of WP .46 springs to go in and thought I would take a look at what was there, with an eye to stop the fork running through the stroke as easy. Oil height 135 Dumped first surprise. Should be 110 undumped by the book. Maybe this is part of the...

here is a link to a new chapter i've been putting together for the last 5-6 weeks or so. http://www.husaberg.org/wiki/index.php/ ... nd_rebuild i hope you like it. this one really is open ended! i have put down loads of tips and ideas and yet might have got some wrong or even...

hi guys finally decided to take the motor out of my bike and give it a try,what i need to know is how do i go about taking it apart to inspect the gear box,taffy you seem to be the man answering all the questions?,i'll be posting pic of the progress if thats ok.... 550 tuned berg with a 06...