stop

Hello. Tried searching but couldn't find anything on my problem. I have an '06 FE550 set up for SM. On occasion I get a grinding noise when releasing the clutch from a stop in 1st gear. Doesn't happen all the time and only from a stop. All other gear changes are fine. Seems more frequent...

Hey! I've got a problem with my Husaberg FS 570 2010. I had been out and run for an hour, suddenly dies. Drove up to the edge and tried to start it. Nothing happened! When I start looking, I heard that the fuel pump went and the smell of gasoline. I pull out the plug to the main relay. Then I...

I have an 09 FE450 US model Here is the scenario. When the bike starts, speedo turns on, everything works fine. If I turn the bike off (hit the kill switch) the odometer shuts down. It also resets all the current data, trip mileage, clock etc. Hours and total mileage are retained. It seems the...

I Was out riding yesterday and my clutch was squeeling like a stuck pig. Been told by DCR that it is actually the bearing in the pressure/drive plate that causes it, i previously thought it was something to do with steel clutch plates. There must be a fix?

hi lads think this problem may have happened to someone else before but got me stumped.bike is a 2003 fc550.just had top end rebuild and fired it up a few weeks ago and running fine.havent changed anything but now starts 1st kick with choke on runs for about 3 seconds then stops.if i keep...

Hi, do i need the decomp stop nut even if i have a new decomp that doesn't use that one i was thinking of the balance

I was going to adjust my settings a little and noticed that my right fork top adjuster won't stop when turning clockwise. Any clues? Thanks

hi i was looking in the docs and found this photo of a crank bearing, its got 3 screws around it to hold it in the case is this something you guys are doing or just a trail? does it work?

For the guys who have totally removed their throttle stop screws on the 09/10 FE models as per the de-restrict PDF file that is floating around. I just done this and by actually totally removing the screw allows the throttle body butterfly to turn past vertical and actually restrict the intake...

Greetings all, Please take a moment and take action on the attached email. For any of you who rode at FR 3 this will have extra special meaning. Dear Fritz, In just Two Minutes you can help stop the proposed closure of 450,000 acres in the Gunnison and White River National Forests in...

Please go to this website http://www.tomself.com and sign the letter to Congress. The CPSC is trying to stop the Sale of all motorcycles and motorcycle parts because they may contain lead. This affects the entire motorcycle industry. Tom Self is a Congressman from Missouri (who has kids that...

in 6 months i've had three decomnp stop bolts snap. two have smacked the engine about and the third one didn't. pure and utter luck! this i believe is an age and fatigue related problem so it moves "up the charts". every chance you get, change the bolt sat in the camwheel and i'll...

i'm unable to get these at present so i was wondering if anyone has come up with a 'clever idea'? some kind of plastic stick about 8-10mm across and chop a bit off? regards Taffy

I notice the crank stop bolt has a plain "thread rolled" end on it. Is it meant to just push up against the crank at any location? On my prevoius bike (KTM RFS), the crank stop bolt was pointed and engaged in a v groove in the crank wheel. On a Husaberg does one just find TDC and then screw the...

I've been reading all sorts of threads regarding the dead stop method for finding true TDC. So I decided to fab up a stop tool with an old sparkplug, an M8 hex, some JB weld and my trusy dremel. I then made myself a protractor and proceeded to check the flywheel. Well, rotating counter...

this is a run down on the findings and how i did it.made a dead stop tool by takeing the centre out of an old spark plug threading m8 and adding an allen bolt protrueding 16mm out the bottom then locking the top with a nut.made a compleate 360 protractor the same size as the flywheel and stuck...

i have been reading all the posts on finding the true tdc on your engine but they dont exsplain the dead stop method can some one help.i think this is why mine is dificult to start. i have fitted new plug all new jetts in the carb and still it wont start. im getting a few kick backs.and today i...

Just bought an 03 fe400e. i've been looking around online for parts and prices. Are guys buying parts mostly from dealerships? motoexotica? Online? 2004 and newer seems to be on bike bandit.com. For my 2003 - Stuff like air filter, wheel bearings, swings arm bearings? Is Online the way to go...

If I'm reading page 63 of the '05 parts manual correctly, it appears that the USA-market '05 FS650e does not come with the throttle slide stop, so there is nothing to remove to de-restrict the engine's horsepower. Am I understanding this correctly?

Hi, I haven’t done this but I have thought it about now and then. Have anyone done a good solution on the water in carburetor problem? When you go through pools of water with speed the water follow the frame to the air filter. I assume it will come from the steering head or from the engine...