step

I read that someone serial coupled two 12v batteries to make the starter motor turn faster. 24v worked good he said. I don't know how he then charged the two batteries with the 12v stator? My idea is to couple a 12v to 19v DC step up converter between the battery and starter motor. Then you...

Got a husaberg390 ... Does anyone else have a problem with brackets pedal/ step plate being way to close to engine. It's like 2,mm gap, I bought a RHK plate to go on it but it's exactly the same.

Ok Guys (& Girls), 02 FE 501 Engine re-build step by step blog. It is what it says on the tin & as a result of this thread. (Cheers Logjump / Zaga / Ned / Big Berg / Tourist & Makazica). http://husaberg.org/mechanical/17557-501-cam-lobe-completely-worn-away.html I’m not going to put...

I'm at 90 hours and am getting a bit of smoke when I rev up, top end might be a bit tired. Anyone done a top end yet? How much more complicated is it with the motor slanted? Any DIY out there?

Anyone put on a larger step plate for the rear brake? I find the stock one is a little small, sometimes its hard to find when you are in a hurry.

Anybody know of a premanufactured step seat for Husabergs? I Have ridden a couple of bikes with them, and although I think they look goofy, I like how they work.

Hello all :) Last week I decided to try my hand at dialing in the jetting of my '02 Fc550. I started by pulling the carburetor and doing a thorough cleaning and inspection of all the bits and pieces. I baselined my settings as such: Dellorto PHM 40 Main Jet= 200 Needle Jet(atomizer)=...

I am thinking of buying an 04 fe450 but cant get the reliability issue out of my head. I impressed with what ive seen of the bike but cant find anyone whose had one for some un bias feed back. Ive just got rid of a DRZ400e which was totally bullit proof and I realize that a Berg will need a bit...