starting

Hello community and Husaberg motorcycle fans. For a long time (after the total GO a year ago) I have a problem with starting. In the brand service, they did a complete repair of the engine, starter and gave me a new battery. However, the technician dismantled the automatic decompressor...

Hello, I just bought a 1999 Fe 600 e The bike is very hard to start. The starter is not currently working. I can get it started about every five tries, each try taking about 5 min. I talked to a ktm mechanic that said the early fe 600s have a problem with the starter failing and the parts...

Hello, (I just got here and its my first post, so be gentle please) I can't get my berg starting. The last time I drove it, it was almost four years ago. I already changed my spark plug, spark plug boot (I cut a piece off the ignition cable), and checked the spark. It isn't the biggest and...

Hi all, have a issue with my fe390 Recently, when starting the bike the starter wil spin but not turn the motor, but if I put into gear and move the rear wheel it will seem to engage and then crank the motor I have replaced the starter, tensioned the torque limiter and checked all the teeth on...

Hi Guys, One year ago i swapped my honda cbr for a husaberg fs 650. Untill 2 months i’ve never had any problems with it. Now the problem is as follows: In the last two months, it has happened several times that i go out for a ride (mostly 30-60min), i shut off the bike at a friends...

I recently bought a 2004 FE 450. I was riding yesterday on the highway and the bike backfired a couple of times and cut out. Now it wont start when using electric start or kick start. I have checked main fuses and the boots around carburetor. Any common problems like this, what must i look for

I have a 2007 husaberg FE 450 which has been having trouble starting recently. It only has about 300 miles, carbs have been cleaned, and brand new battery. It has trouble starting. When it does start, it often dies especially when throttle or clutch are applied. Each time I start the bike I put...

I've put up a similar thread in the past but I have now just replaced the piston and rings, shimmed the valves, fitted a new plug and adjusted the TPS and I am still having a hard time starting the engine. It cranks over fine....nice and fast but takes a long time before it starts to fire and...

I've had hard starting since I bought this bike a few months ago and it's starting to annoy me to a point where I will put this thread up to ask if anyone else has had this problem and found how to get their bike starting a bit quicker. I start it with the throttle closed and it takes the...

Hello guys (Sorry if this is wrong place to post this) But i have a problem and maybe im just too stupid to solve it. My husaberg stalled while i was riding it back home, like there was no gasoline. I Went home and started checking things up. So the startermotor doesnt have any problems...

A friend of mine who helped me locate a complete fc650 stator, flywheel and 2 covers told me- "if you file out the pole pic up points slightly enabling you to advance the ignition slightly it makes a world of difference to starting and performance" Anyone else have knowledge or adjustment...

Hi just new my name is Les from Newcastle Australia and I was wonderingif ang one could tell why lately my 2013 fe250 is getting hard to start. it used fire up easy even without the cold start button cheers

Hi all just got my bike running but it will start when cold but as soon as it is running and it stops it will not start up again it won't even try and start anyone help thanks

Hello, I'm from Germany and already a member for a while (2015) and reading your posts with interests. I bought a FE 501 model 2002 a while ago. Since I own the bike there's permanent trouble with it. I had it already in a former Husaberg workshop to get the engine fixed (ball bearings...

Unfortunately for me on the weekend I suffered the common Husaberg 4 stroke 2009 to 12 bike not starting problem. The bike will crank but will not start. If you listen you will NOT hear the fuel pump prime after the start button is pushed. The problem is the broken switched earth wire from the...

Hi all, i just recently got myself a 2002 husaberg fe400e and it seems to have troubles starting. when i bought it the guy said that it needed a valve adjustment so i went ahead and did that. after that was done it started on about the 15th kick or so and ran great, lots of power and a very fun...

Bike is FS 450E 2005 model with an FCR-MX 39 carburettor. I had driven the bike working perfectly normal the day before, and it started like a charm and has done so for 3 years regardless of the weather or temperature (above 0 Celcius). It has always started at the first crank with e-starter...

Today I was riding for the first time new to me '07 550 in supermoto guise. I really like it so far. Engine is freshly rebuild, updates done, dual valve springs, orangeberg mod for weep hole, roller bearings etc. Starts perfect, sounds really good and healthy. My plans are to install two cooling...

Hey everyone, I adjusted the valves on my 1994 FC501 today and hooked everything up to try and start it. (I bought this bike in nonrunning condition and haven't had it started) I first put the bike in TDC and verified that the piston was at its highest point with a dial indicator. A mark...

Finally! Valves at one sixth Carb tweeked Torque limiter shimmed Freewheel sprag renewed Shorai battery fitted R6 starer motor Heavy duty live and earth cables Boom! The only issues were that with the moto-x rotor the battery won't charge and the choke was impossible to reach with the tank on...