standard

Hi, last year I bought a 2011 570 FE. It's a european model. I'm living in Germany and recently tried to renew the license for driving on public roads. However I failed the CO test: the Berg is homologated with a CO of 0,3 but my Berg put out 1,8 CO without catalysator and air intake reduction...

650cc, '06 Magura clutch Road chassis, clip on handlebars. Recent race meeting lost the clutch, the slave piston had twisted in the bore and the fluid lost in the engine I presume. Easy fix with new o-rings but it has shown up another problem. Because of the handlebar position the fluid...

Hi all I want to replace the timing chain on my 07 FS550 soon. I've bought a new standard DID chain together with the standard joining link to suit. I know there's a ridiculously expensive OEM tool that can be used to make the join but are there any other aftermarket tools that will do this...

I've read around a little bit and people are saying "just use the coolant for a dirt bike, don't take any risks". But in theory, coolant is coolant. Lowers freezing point, and raises the boiling point so is it fine to use a standard coolant that one would use in a car?

2007 fe550e piston inspection - tools needed I'm about to check the piston in my 2007 fe550e that has not been worked on since new. I want to get all the tools and parts before starting work. 1. Looking through the workshop manual one thing I am unsure of is whether I need to buy a new...

So . . . I have an FE450 enduro that i want to run on the road in summer Ive bought a nice set of SM wheels and disks ( 320 front ) and the lovely caliper and master cylinder off the 570 SM or KTM equivuilant - but . . ovbiously it wont fit on the standard forkleg type fitting - I was...

I'm just announcing nice and early the call for Force ride 5 it is to the world famous ISLE OF MAN home of the TT races. dates the road racing starts on Saturday 29th August 2015, the last is on Friday 4th September and the next day there is a Manx two-day trial. Essentially though 29/8 to...

Recently purchased a 2010 FE 390 and first job was to replace the cam chain and tensioner as previous owner hadn't realised it needed replacing!! Used standard Husaberg parts and engine is all fine. Anyway, coming from a 2006 FE 450 I still notice the 390 engine sound (tick, tick, tick) and...

Ive treated myself to a 300 i traded my beloved 450 for an 11 Te 300 while I'm waiting for shoulder surgery, crazy yes i know........ lol my question is this, what are the standard spring rates for this bike????? cheers

for sale guts standard height soft seat foam for 09-11 bergs, installed and rode for 10 miles, too low and soft for me. $40 plus shipping. 973-219-9593

Has anyone modified the standard exhaust silencer on the new bikes? If so, what and how did you do it? What were the results and your views? I'm hoping to reduce the heat build up caused by the standard silencer, I know there will be a trade of with noise but I'm hoping to keep it a quiet as...

whats the offset on these babies and can you adjust these?

I still have about 2 months before I purchase my next bike (hopefully the 570), so I am finding out as much as I can now. Who has opted for the Acprovic pipe for their 570 and what do they think ? Have you tried the Acprovic on your bike and the standard pipe ?? It's a lot of extra...

just wondered if anyone has had cause to weld the big end pin of a standard crank? i've had a crankshaft twist and this seems the obvious solution. i trust anyone who has is talkinbg "sixfiddy" (patent stolen from bobzilla!). regards Taffy

Hi folks, What should the standard gearing be for my 2000 FC600? Mine came with a huge front sprocket and a small rear sprocket like it might have been used for supermoto or something. I barely get it out of 3rd gear around the local tracks (Still another 3 to go!). Cheers, Ross

whats standard sprocket size on fc 470 02.??? i am running a 42 on the rear with supermoto wheels and its got to much top speed and no acceleration, only wheelies of throttle in first. what do you guys suggest??

hi u all just bought my self an 501 >2003 berg.check out the site ;very good info on ere. but can any one answer me this ? or has anyone any experience on the mot. well ere goes the exhaust that is fitted is the origanal but has no B S markings how will it get past the test and wot...

Hi, These seem to be the standard setting: > 2002 FE 140mm > 2002 FC/FS 100mm > 2003 FC 90mm > 2003 FE/FS 110mm > 2004 FC 100mm > 2004 FE/FS 110mm > 2005 FC 95mm > 2005 FE/FS 110mm What are you running? If I not totally have lost my mind, I use 112mm in my -02.

A friend of mine and I were discussing the differences, advantages and/or disadvantages of standard versus inverted forks. Some of you experts please enlighten me on what exactly makes the newer inverted forks better than my 50mm WP Extremes that are on my '99 FE 400. The reason we started...

Is it OK to run it un-oiled? I think this is the main source of oil in my carb boot :oops: Rowley