stainless

Hi! I have a husaberg 450fe 2006. I decide to order stainless oil filter but surprise, I order the short one and I have the long one in the bike. Can it be used in my 450? if so, Is there any utility to the short oil filter (cold, better pre-heat) vs long (heat, oil flow)? I double check...

Hi fellow Berg owners I have been thinking of getting a stainless oil filter for my FE570 Rally. Have someone tried to fit one? Have done alot of searching and have only come up with the solution on buying one to fit a KTM500EXC (XC) as it should fit, or? The Hilfo HF655 fits both the...

So I just pulled my engine on my 2011 fe570 for the first time while doing some other work to the bike and I'm considering changing out the valves. From what I understand the intake valves are titanium and the exhaust valves are steel. I've heard a number of KTM riders have swapped out titanium...

Hi all, long time since I've been on the forum as the 390 is in bits having a winter refurb ! I have purchased a solid rear and new front stainless disc from racedisks Now for the question Is it OK to put stainless bolts into the alloy hub ? I have read that there can be a reaction between the...

I've just taken stock of a small batch of Stainless steel oil drain bungs for the 1989-2002s. the spanner size has increased to 17mm so I hope you won't wrench the faces off these. a lot of work is going on on the web shop with my new assistant Alison, it is only the second time in ovfer 20...

I'm selling a Scott's stainless oil filter that came with my bike. Fits all F models 00 to 08. It has less than 50 hour street riding and looks perfect. I think it probably is better than paper filters, but I don't want to clean it every time. Will sell for $35 shipped to US address. Here's a...

EXCELLENT CONDITION, FORESTRY APPROVED, +$15 shipping. you can call me with any question. Thanks, tim 602-625-3789

I removed the copper washer on the hex bolt that holds the oil pressure relief valve in and added a small washer to increase preload. total increase about 1.5mm. as stock the oil pressure at idle was 20 psi going to 30 at high rpm (7000) now its 30psi at idle and 40 at high rpm. also...

I have a 2008 FE 450 and was wondering if anyone is using the Scott's SS oil filters? If so, how long and any problems with them? thanks HusaRod

I have been using a Scotts stainless oil filter on my track bike for the last year and have been very pleased with it's performance, has anybody used one on their berg? I see they list one on their site. www.scottsperformance.com/products.php? ... c251eb1d02

often see 'stainless wheelspacers' for sale on e-bay. are they any good? regards Taffy

I'd like to replace the bolts on the front brake caliper and the rear sproket with stainless steel ones, is this ok to do? I ask cos not sure if these bolts are high tensile or not and stainless shouldn't be used in high tensile applications. thanks B

where can i get a reuseable stainless steel oil filter to fit a 2003 fe650 i have just baught this bike.i want to do all the cheaks as listed in the owners docs and chainge the oil and filter.is there anything i should realy look out for on this modle it has only done 100hrs and deler serviced.i...

Stainless Steel Reusabel oil filter where in AUS can I purchase one for an 05 650FE. wanting to know which is the best brand? the process of cleaning? , drying? and reusing it? also how often do you clean it etc every second oil change? Are they better than the paper filters? Any info...

Don't laugh, but has anyone had experience with stainless oil plugs corroding or seizing into aluminum or magnesium cases? If so, what if any anti-seize products are recommended. Now I'm wondering about my stainless oil filters?? Any suggestions would be appreciated. Thanks, Dave 98...

I wanted to get some opinions on which oil filter is best for Bergs, stainless or paper? I've heard pluses and minuses for both. Thanks EuroEnduro

Hi All Anyone have any problems with their exhaust rubbing on boots or overboot clothing? I`ve suffered with this problem on my 04`s and my 05`s. Gruntunberg (Steve) has fabricated a stainless steel exhaust guard to solve this problem. This guard is a quality piece of kit and looks great on the...

Hi, The exhaust pipes should be stainless steel or? I think I read that somewhere but you get corrosion nevertheless. How to prevent this?