sprague

Hi folks, Read a bit in older threads, but neither wanting to necropost or clutter the other clutch basket thread, here's the issue. Like a few of yours, my bike has the starter spine/whine issue. Roughly half the times I hit the estart. I could live with it, but now that I'm elbows deep...

Quick question, the Sprague should free wheel in counter clockwise position when looking at it on bike? What is the best way to peen the timing chain link? Thanks

H25014101 has anyone any dimensions and a lead on how to get this bearing? cheers Taffy

I have recently rebuilt my 2008 Hus 450fe engine and included the double valve spring mod.(Ktm 450 spring kit) I replaced the intermediate starter sprague freewheel bearing new but recently it started slipping . I suspect that the inner gear shaft that fits into the bearing that engages the...

So I'm looking for some info forMy 2005 fs650e about the sprague gear( starter one way bearing ). I decided that since it's winter here I would takle the starting issue with my bike. For about half the summer my bike would'nt start with the e-starter button, the starter would just spin freely...

the sprague inner gear known as the freewheel gear for the 2001-2002 models has been discontinued. I sold my last one yesterday :cry: :cry: if I recall, fitting 2001/2 to 2003/8 or vice versa causes a whining noise? and I can't imagine this gear being made by anyone else for anyone else...

I'm keen to get this sorted so if anyone can help it would be appreciated. I need the dimensions of the inner and outer running surfaces for the old 1990's sprague bearing? so that'll be the OD of the gear inside and the ID of the outer gear? If I can have it in mm to .01 that would be...

My 2002 550 sprague was slipping so I replaced the entire assembly (inner hub, outer hub and the sprague).. but I originally thought I could use the newer parts from a 2004. This worked, but the bike had the infamous high pitched whine (I was gonna get some Pratt & Whitney decals for it)...

This is a new sprague, tried adding a new spring also... no love. Engine is cold, spark plug removed, turns over very easily by hand with the kickstarter. Is this normal with a cold engine??? I know they are a re-starter... and it generally works pretty well once the engine is warmed up...

Hi, i have '03 FE 400 with worn out e-starter clutch, i don't have money to buy a whole new 04+ unit and I'm wondering if i can put only the sprague from 04 model in my 03 since it is the most worn out part in whole assembly. Outer gear is slightly worn out but not nearly as much as sprague...

Just to let you know that I have had some sprague springs produced that are of superior quality to the ones fitted OEM. as previously said on UHE, the springs are inferior from the factory and don't expand between each part while over stretching in the gaps. the ones i've had made are...

Right so it looks like I need a new starter sprague but I have been Reading about a mod for it, what does this involve or do I just need a new sprague? If so has anyone got the part number, price and where I can get them? Am I also right in thinking I just need to remove the clutch and then...

i have had the sprague assessed by someone in the aircraft industry and i explain what are believed to be the problems and cures. on the husaberg, the inner spins with the clutch basket permanently. the outer only spins with the starter. on an aircraft engine, the inner gear and the sprague...

I have a side project to make my 2001 fx-650 start on the button someday. I have a gsxr 750 motor on it with upgraded battery also have a sparks rewound stator. It starts better than ever on kicker. when i try the e-start it does not engage anything, the starter spins real good though. My...

As so many people before me I am also on a quest for a working starter on my 2002 650, have bought the R6 starter and the super battery from 'ol cranky' and am now playing around with the torque converter and the sprague. Torque converter is working properly tested it with a torque wrench and...

I like many have a Berg that won't start on the electric button (Fe550e 2005). It now has an R6 starter and bigger battery, valves and auto decomp checked and starts easily with the kickstart. (if it hasn't fallen off, though that's another story) The starter motor seems to spin though and...

found that the snap ring needs moved off the cage of the clutch to the free wheel outer the bike turns over with the Husaberg starter now . Starter works again . Didn't work since 2002 . Have a 2001 FE 650.

I'm not 100% sure what happened, but from one moment to the other the starter doesn't work anymore. It sounds like starter is spinning but doesn't crank the engine at all. I had a look at well known problems in the owners doc but this one seems different? Or is it a failing starter sprague...

has anyone tries hannu's discovery? to tighten the spring on a sprague????? we need to know if it works and weeks after it was found i have heard nothing? c'mon you BTs!!! regards Taffy

follow this link and the thread that it's from. http://www.mad-ducati.com/Technical/Sta ... lutch.html http://www.husaberg.org/index.php?name= ... ght=ducati what i can tell you is that i couldn't split the spring and then put it together correctly. if you do better then let us all...