North west coast. The terrain is mostly pretty hard going unfortunately!
That bit of the track is the best for miles around and lasts about 100m :D
Thought I'd post here while I wait for any help in the main section, shes no running :(
When I have the MAP switch in the aggressive position I am getting a flat spot when I crack the throttle from Idle. If I crack it open quick enough it stalls. Anyone have any Ideas. When the switch is in the other 2 positions it is fine.
This photo is absolutely
incredible... it should be a
poster for what not to do 8O .
But can you tell what's
wrong with it?
Yep, guess you spotted it, too.
Never, never try to Prop-Start an aircraft
without chocking the wheels!
I am sure that caught your eye right...
What would be the best spot to put a Selco temp switch that closes at 190F and opens at 160F, in a DIY fan configuration?
I was thinking about putting one by the inlet (where the coolant arrives from the pump). But at that position, would the temperature rarely go under 160F?
I could also...
I just purchased a used 05 fe550e. The bike came with the Dreaded Dead Throttle Spot that occurs when the throttle is wicked open off idle.
After reading all the posts that an FCR jetting search would produce I spent several hours playing with jetting with no favorable results when I decided...
Please advise chaps - what is this?
I know I'm obviously a nerk!
Oh, twistthethrottle I'd already removed the tran cover B4 reading your fix report - why I got so depressed :(
Rowley