solved

Unfortunately for me on the weekend I suffered the common Husaberg 4 stroke 2009 to 12 bike not starting problem. The bike will crank but will not start. If you listen you will NOT hear the fuel pump prime after the start button is pushed. The problem is the broken switched earth wire from the...

I even laughed at myself finding this out, I wont blame anyone doing the same. Bought the 570 from a dealer so I never got to speak with the owner, deal included a map-switch. Back in the garage prepping the bike I could not find the switch connector, asked around and nope not there! (still...

Hi Just a quick note about some 2013 FE350 issues. My 350 seemed to overheat very easily on any slow uphill or single track. Then it would start steaming so obviously it was boiling but the fan still wasn't on. So after a bit of testing showed that the thermo switch was not really opening...

Hello I just bought Fe 650 and previous owner messed with kickstarter so it was jammed. I removed assembly and there was little damage caused by wrong fitting. I tried to re-install assembly, it seemed fine before bolting clutch. Kickstarter gear moved freely both directions until lever was...

I've spent a lot of time and effort insulating the gas tank, putting fans on the radiators, etc. Still had boiling gas problems on steep slow climbs. So I bit the bullet and went the exhaust route. After 3 months, no problems. Let me know what you think. [attachment=1:2rmw5b94]new...

:( Hi all i have check all wiring and rebuilt with new wire all that it need and also i have put a new solenoid and battery on my FC 470 E. All works fine but now when i try to start the starter motor runs and when piston in is top position starter motor just stop to push it over and freerun...

Went to visit my closest dealer (Promotopieces, Mascouche, QC) today to check the primary gear nut and balancer nut and fix my starting problem. When I met the owner of Promotopices last weekend and tried to start my 2004 650, he immediately suspected the torque limiter. When the motor was...

sorted! cheers!

hi guys, new to this site,excelent by the way, i thought i would share with you my experience of poor elec starting on a 02 501.no matter what i did it wouldnt start on the button but kicked first time,to cut a very long story short i have fitted a new stator, new 7 amp battery and the bob...