snapped

Hi all, I'm Tanel and I am new here. I recently bought FE 550 E 2006 and everything seemed good till I noticed that clutch cover case, where oil is filled, thread is broken, it is snapped inside (half of it seems to be missing). Oil plug still works and seals (maybe small leak). But question is...

hi guys my mate has snapped his tps on his 2004 fe450 carb, its the tps with 2 screws rather than one securing it. were desperate to find a replacement In the uk before this weekend if anyone Can advise where we could find one. we've had it disconnected although it already was being snapped...

Hi, So I was riding along and went to shift down a gear. As I do, I hear a metallic clunk and my gear lever goes limp and won't reset itself. Manage to get to where I was going and turn the bike off for 5 mins. Go to try and start it again to get home and the E starter is just whining. Tried...

Hi all, was out on the bike on Sunday and noticed an intermittent "chinking" noise. After a few hours riding it bogged down on me and eventually cut out and refused to start. Pulled the plug out and it was soaked so stripped and cleaned the carb to start with, no joy. Gave Taffmeister a...

Broken tappet and I think I need a new head Good evening all, I have a 1997 FE350 which I have been very slowly working on. The time has come to have a look at the clearances and top end to see if I can make it easier to start! I'd like to ask a few questions, please correct me if I use the...

...not exactly sure what happened but now i need a new muffler and i have no idea where to even start looking. its a twin pipe leading into a single muffler. can anyone help me?? i need my bike!!!!

Hi guys n girls, Had a sad day today. Took the bike out for a little blert, & shortly into the ride the chain snapped. Scored the rear anodised wheel rim badly, so they're a right off... :cry: Anyway, I'm looking for a fairly good quality replacement chain, I believe "x-link" are the best...

several of you have had the crank snap right at the end and didn't know it can be repaired well this is the job I had done to a customers crank recently! He has an '04 semi-circular/semi-pork chop crank that snapped across the base of the thread for the crank nut. so this is what was done...

Hi Guys n'Galls Warm, sunny conditions, 2004 FE501 with 17" S/M wheels and road tyres fitted, dropped down a cog or two for a bit of acceleration and 'bang' ... there's my chain hanging all limp-like off the swingarm! (It actually fractured across one of the pins that make-up the split link)...

Hi All, I recently snapped my gear selector in a low side slide. Luckily Taffmeisters managed to get hold of 1 for me for £70 with a note, "It's not who you knew, it's what you know." I still chuckle when I read it. Well now I've found the time to replace the part and so I've done so and taken...

Hi all, has anyone got a side stand they would like to sell as mine broke today! Cheers Freaky

I snapped my kickstart pin clear off flush off with the moter casing and was wondering if anyone knew where to get the parts from. The guy i bought the bike off of no longer has any hus. connections i think the bike is an 03

Boy, I'm having no luck this week! Snapped my gear lever on Wednesday, got it welded-up and re-fitted, changed the oil and cleaned the air filter ready or the weekend. Went out to the track on Sunday and one of the header pipes snapped! Looking from the front, it's the left hand side pipe...

As the subject states i have snapped the frame on my 04 FS 650! Got a couple of questions:- 1. Should it get it welded? The break is by the headstock about 10mm above where the two smaller diameter pipes join to it. 2. I have sourced a frame from a 03 fx 650, will this fit? Thanks

:eep: Would you beleive that I have somehow managed to encounter a snapped countershaft on my '04 FE650. The bike has done almost 4000km since Nov (Purchase) and has been serviced oil/air etc every ride. It is religiously checked over as per handbook requirements. Riding has been...

Managed to snap the bottom off of the exhaust valve spring. Have any of you guys heard of this happening before? I couldn't get any warranty on it because they reckon I've overreved it, which I didn't but anyway that's what I thought a rev limiter was for? Luckily the valve didn't drop...